Identificador persistente para citar o vincular este elemento: http://hdl.handle.net/10553/42668
Título: Predictability of Plastic Parts Behaviour Made from Rapid Manufacturing
Autores/as: Monzón, Mario 
Hernández Castellano, Pedro Manuel 
Benítez, Antonio N. 
Marrero Alemán, María Dolores 
Fernández, Ángel 
Clasificación UNESCO: 331212 Ensayo de materiales
Palabras clave: Laser sintering
Rapid manufacturing (RM)
Analysis of variance (ANOVA)
Rapid prototyping
Additive manufacturing, et al.
Fecha de publicación: 2009
Editor/a: 1007-0214
Publicación seriada: Tsinghua Science and Technology 
Resumen: One of the most important issues to resolve in parts manufactured from rapid manufacturing (RM) technologies is to know their behavior working under real conditions. Total quality manufacturing (TQM) is only possible if mechanical properties are well known in the design stage depending on the processing parameters. This work is mainly focused on testing of several samples made with different selective laser sintering (SLS) parameters and technologies. This procedure is the starting point to establish a basis for designing for RM and the standardization of RM testing. The experiments and the analysis of variance (ANOVA) analyzed the effects of several factors on mechanical properties. The SLS technologies were 3DSystem and EOS. The results show which factor has a large effect on the variables and the interaction between them. The conclusions are very useful for developing rules for designing (designing for RM) and creating new standard rules (ISO, AISI, and DIN) for RM materials and parts testing. The ANOVA gives a better knowledge of the effects of these factors and eliminates unimportant parameters.
URI: http://hdl.handle.net/10553/42668
ISSN: 1007-0214
DOI: 10.1016/S1007-0214(09)70075-6
Fuente: Tsinghua Science and Technology[ISSN 1007-0214],v. 14, p. 100-107
Colección:Artículos
Vista completa

Google ScholarTM

Verifica

Altmetric


Comparte



Exporta metadatos



Los elementos en ULPGC accedaCRIS están protegidos por derechos de autor con todos los derechos reservados, a menos que se indique lo contrario.