Please use this identifier to cite or link to this item: http://hdl.handle.net/10553/42668
Title: Predictability of Plastic Parts Behaviour Made from Rapid Manufacturing
Authors: Monzón, Mario 
Hernández Castellano, Pedro Manuel 
Benítez, Antonio N. 
Marrero Alemán, María Dolores 
Fernández, Ángel 
UNESCO Clasification: 331212 Ensayo de materiales
Keywords: Laser sintering
Rapid manufacturing (RM)
Analysis of variance (ANOVA)
Rapid prototyping
Additive manufacturing
Selective laser sintering (SLS)
Issue Date: 2009
Publisher: 1007-0214
Journal: Tsinghua Science and Technology 
Abstract: One of the most important issues to resolve in parts manufactured from rapid manufacturing (RM) technologies is to know their behavior working under real conditions. Total quality manufacturing (TQM) is only possible if mechanical properties are well known in the design stage depending on the processing parameters. This work is mainly focused on testing of several samples made with different selective laser sintering (SLS) parameters and technologies. This procedure is the starting point to establish a basis for designing for RM and the standardization of RM testing. The experiments and the analysis of variance (ANOVA) analyzed the effects of several factors on mechanical properties. The SLS technologies were 3DSystem and EOS. The results show which factor has a large effect on the variables and the interaction between them. The conclusions are very useful for developing rules for designing (designing for RM) and creating new standard rules (ISO, AISI, and DIN) for RM materials and parts testing. The ANOVA gives a better knowledge of the effects of these factors and eliminates unimportant parameters.
URI: http://hdl.handle.net/10553/42668
ISSN: 1007-0214
DOI: 10.1016/S1007-0214(09)70075-6
Source: Tsinghua Science and Technology[ISSN 1007-0214],v. 14, p. 100-107
Appears in Collections:Artículos

Show full item record
Recommend this item

Google ScholarTM

Check

Altmetric




SHARE



Items in accedaCRIS are protected by copyright, with all rights reserved, unless otherwise indicated.