Please use this identifier to cite or link to this item: http://hdl.handle.net/10553/114412
DC FieldValueLanguage
dc.contributor.authorFranesqui García, Miguel Ángelen_US
dc.date.accessioned2022-04-25T08:49:49Z-
dc.date.available2022-04-25T08:49:49Z-
dc.date.issued2017en_US
dc.identifier.isbn9780203842386en_US
dc.identifier.otherScopus-
dc.identifier.urihttp://hdl.handle.net/10553/114412-
dc.description.abstractAn economical and environmentally-friendly solution to stabilize jointed vertical rock slopes in works of improvement and cross section widening of a local road section in Gran Canaria Island (Spain) is presented in this paper. Due to the mountainous relief of this territory, this road cross over an extremely narrow section between two deep cliffs with vertical rock slopes on jointed phonolitic ign-imbrites. The structural solution involves the construction of traditional gravity retaining walls with passive fully-grouted steel bar anchorages within its foundation. The rock mass nailing under the foundation of the retaining walls and even the adjacent rock slopes is also designed. This system combines traditional constructions of high simplicity with modern techniques of rock reinforcement.en_US
dc.languageengen_US
dc.relation.ispartofVolcanic Rock Mechanics: Rock Mechanics And Geo-Engineering In Volcanic Environments
dc.sourceVolcanic Rock Mechanics: Rock Mechanics and Geo-engineering in Volcanic Environments[EISSN ], p. 171-177, (Junio 2017)en_US
dc.subject250706 Geofísica de la masa sólida terrestreen_US
dc.subject330529 Construcción de carreterasen_US
dc.titlePassive anchors within retaining walls to stabilize volcanic rock slopes in road wideningen_US
dc.typeinfo:eu-repo/semantics/bookParten_US
dc.typeBookParten_US
dc.identifier.scopus85127961513-
dc.contributor.orcidNO DATA-
dc.contributor.authorscopusid57188747644-
dc.description.lastpage177en_US
dc.description.firstpage171en_US
dc.investigacionIngeniería y Arquitecturaen_US
dc.type2Capítulo de libroen_US
dc.description.numberofpages7en_US
dc.utils.revisionen_US
dc.date.coverdateJunio 2017en_US
dc.identifier.ulpgcen_US
dc.identifier.ulpgcen_US
dc.identifier.ulpgcen_US
dc.identifier.ulpgcen_US
dc.contributor.buulpgcBU-INGen_US
dc.contributor.buulpgcBU-INGen_US
dc.contributor.buulpgcBU-INGen_US
dc.contributor.buulpgcBU-INGen_US
item.fulltextSin texto completo-
item.grantfulltextnone-
crisitem.author.deptGIR Fabricación integrada y avanzada-
crisitem.author.deptDepartamento de Ingeniería Civil-
crisitem.author.orcid0000-0003-3803-5690-
crisitem.author.parentorgDepartamento de Ingeniería Mecánica-
crisitem.author.fullNameFranesqui García, Miguel Ángel-
Appears in Collections:Capítulo de libro
Show simple item record

Google ScholarTM

Check

Altmetric


Share



Export metadata



Items in accedaCRIS are protected by copyright, with all rights reserved, unless otherwise indicated.