Identificador persistente para citar o vincular este elemento:
http://hdl.handle.net/10553/49938
Título: | TiO2, surface modified TiO2 and graphene oxide-TiO2 photocatalysts for degradation of water pollutants under near-UV/Vis and visible light | Autores/as: | Pastrana-Martínez, Luisa M. Morales-Torres, Sergio Kontos, Athanassios G. Moustakas, Nikolaos G. Faria, Joaquim L. Doña-Rodríguez, José M. Falaras, Polycarpos Silva, Adrián M.T. |
Clasificación UNESCO: | 221022 Fotoquímica 221001 Catálisis |
Palabras clave: | Heterogeneous photocatalysis Modified titania Graphene oxide-TiO2 Scavengers for holes and radicals Diphenhydramine, et al. |
Fecha de publicación: | 2013 | Editor/a: | 1385-8947 | Proyectos: | Water Detoxification Using Innovative vi-Nanocatalysts | Publicación seriada: | Chemical Engineering Journal | Conferencia: | 7th European Meeting on Solar Chemistry and Photocatalysis - Environmental Applications (SPEA) | Resumen: | In this work the photocatalytic activity between a TiO2 catalyst synthesized by a modified sol–gel method (ECT), TiO2 nanoparticles surface modified with organic shell layer (m-TiO2) and a graphene oxide-TiO2 composite (GOT-3.3) was compared. Diphenhydramine (DP) pharmaceutical and methyl orange (MO) azo-dye were used as model water pollutants under both near-UV/Vis and visible light irradiation. The TiO2 photocatalyst from Evonik Degussa Corporation (P25) was used as reference material and the pseudo-first order rate constants (k) and total organic carbon (TOC) removal were determined. Under near-UV/Vis irradiation, the results show that ECT and GOT-3.3 are highly active photocatalysts for the degradation of DP (k = 64.5 × 10−3 and 62 × 10−3 min−1, respectively) and mineralization (TOC removal of 55% and 50%, respectively) being the overall performance comparable to that obtained with P25 (k = 56 × 10−3 min−1 and 48% of TOC removal). The composite GOT-3.3 presents a markedly higher activity for conversion of the MO dye (k = 126 × 10−3, 52 × 10−3, 49 × 10−3, 18.1 × 10−3 min−1 for GOT-3.3, P25, ECT and m-TiO2, respectively) as well as for its mineralization, with TOC removals tailoring the same order. Under visible light illumination, P25 is practically inactive and GOT-3.3 (for DP) and m-TiO2 (for MO) are the photocatalysts with better properties than P25, or even than ECT. Scavenger agents were used as a diagnostic tool for the analysis of the photocatalytic mechanism, being defined three ratios to understand the relevance of each step in this mechanism. Regarding DP, it was concluded that direct oxidation by photogenerated holes is more important for the modified TiO2 materials (m-TiO2 and GOT-3.3) than for ECT and P25 which present higher availability to generate radical species from photoinduced holes. A photoreduction mechanism on the surface of the photocatalysts was observed for MO, the addition of EDTA (electron donor) greatly enhancing the rate of MO photoreduction. | URI: | http://hdl.handle.net/10553/49938 | ISSN: | 1385-8947 | DOI: | 10.1016/j.cej.2012.11.040 | Fuente: | Chemical Engineering Journal [ISSN 1385-8947], v. 224, p. 17-23 |
Colección: | Artículos |
Citas SCOPUSTM
91
actualizado el 24-nov-2024
Citas de WEB OF SCIENCETM
Citations
79
actualizado el 24-nov-2024
Visitas
73
actualizado el 14-ene-2023
Google ScholarTM
Verifica
Altmetric
Comparte
Exporta metadatos
Los elementos en ULPGC accedaCRIS están protegidos por derechos de autor con todos los derechos reservados, a menos que se indique lo contrario.