Please use this identifier to cite or link to this item:
http://hdl.handle.net/10553/76911
Title: | The design of a smart imaging core for automotive and consumer applications: A case study | Authors: | Kruijtzer, Wido Gehrke, Winfried Reyes Quintana, Victorio Jesús Alkadi, Ghiath Hinz, Thomas Jachalsky, Jörn Steux, Bruno |
UNESCO Clasification: | 33 Ciencias tecnológicas | Keywords: | Image processing System level design Automotive engineering Coprocessors Radar detection, et al |
Issue Date: | 2005 | Publisher: | Institute of Electrical and Electronics Engineers (IEEE) | Conference: | 3rd IEEE/ACM/IFIP International Conference on Hardware/Software Codesign and Systems Synthesis CODES+ISSS 2005 | Abstract: | This paper describes the design of a low-cost, low-power smart imaging core that can be embedded in cameras. The core integrates an ARM 9 processor, a camera interface and two specific hardware blocks for image processing: a smart imaging coprocessor and an enhanced motion estimator. Both coprocessors have been designed using high-level synthesis tools taking the C programming language as a starting point. The resulting RTL code of each coprocessor has been synthesized and verified on an FPGA board. Two automotive and two mobile smart imaging applications are mapped onto the resulting smart imaging core. This mapping process of the original C++ applications onto the smart imaging core is also presented in this paper. | URI: | http://hdl.handle.net/10553/76911 | ISBN: | 1-59593-161-9 | DOI: | 10.1145/1084834.1084870 | Source: | CODES+ISSS 2005 - International Conference on Hardware/Software Codesign and System Synthesis, p. 124-129, (Noviembre 2005) |
Appears in Collections: | Actas de congresos |
Items in accedaCRIS are protected by copyright, with all rights reserved, unless otherwise indicated.