1. accedaCRIS
  2. Publicaciones
  3. Actas de congresos
Please use this identifier to cite or link to this item: http://hdl.handle.net/10553/69999
DC FieldValueLanguage
dc.contributor.authorTudoran, S.en_US
dc.contributor.authorVoiculescu, I.en_US
dc.contributor.authorGeantǎ, V.en_US
dc.contributor.authorVizureanu, P.en_US
dc.contributor.authorMîrza Roşca, Iulia C.en_US
dc.contributor.authorPǎtraşcu, I.en_US
dc.contributor.authorGǎlbinaşu, B. M.en_US
dc.contributor.authorCiocoiu, R.en_US
dc.date.accessioned2020-02-05T12:51:50Z-
dc.date.available2020-02-05T12:51:50Z-
dc.date.issued2019en_US
dc.identifier.issn1757-8981en_US
dc.identifier.otherScopus-
dc.identifier.urihttp://hdl.handle.net/10553/69999-
dc.description.abstractAmong the biomedical alloys, titanium based alloys are currently the best solution for implantation as a result of their low levels of toxicity. To improve mechanical properties, a series of chemical compositions of some titanium alloys have been studied over the past 15 years, to provide elasticity values as close as possible to bone. The paper presents the main mechanical and microstructural characteristics of Ti-Nb-Ta-Zr alloys compared to other titanium brands. It was found that in the absence of heat treatments, the highest hardness values (437HV1) were obtained for the Ti15Nb7.6Ta8Zr alloy, and the lowest hardness value (259 HV1) was obtained for the Ti98.4 alloy.en_US
dc.languageengen_US
dc.relation.ispartofIOP conference series. Materials science and engineeringen_US
dc.sourceIOP Conference Series: Materials Science and Engineering [ISSN 1757-8981], v. 572 (1)en_US
dc.subject3312 Tecnología de materialesen_US
dc.subject.otherTitaniumen_US
dc.subject.otherTi-Nb-Ta-Zren_US
dc.subject.otherMaterialsen_US
dc.titleEffects of the chemical composition on the microstructural characteristics of Ti-Nb-Ta-Zr alloysen_US
dc.typeinfo:eu-repo/semantics/conferenceObjecten_US
dc.typeConference proceedingsen_US
dc.relation.conference2019 International Conference on Innovative Research, ICIR EUROINVENT 2019en_US
dc.identifier.doi10.1088/1757-899X/572/1/012022en_US
dc.identifier.scopus85070588089-
dc.identifier.scopus2-s2.0-85070588089-
dc.contributor.orcid0000-0003-0623-3318-
dc.contributor.authorscopusid57210415550-
dc.contributor.authorscopusid18435025300-
dc.contributor.authorscopusid6505814202-
dc.contributor.authorscopusid16308136100-
dc.contributor.authorscopusid55950942700-
dc.contributor.authorscopusid36873583500-
dc.contributor.authorscopusid55014653900-
dc.contributor.authorscopusid55338395500-
dc.identifier.issue1-
dc.relation.volume572en_US
dc.investigacionIngeniería y Arquitecturaen_US
dc.type2Actas de congresosen_US
dc.description.notasThis work was supported by a grant of the Romanian Ministry of Research and Innovation, CCCDI – UEFISCDI, project number PN-III-P1-1.2-PCCDI-2017-0239/60 PCCDI 2018, “OBTAINING AND EXPERTISE OF NEW BIOCOMPATIBLE MATERIALS FOR MEDICAL APPLICATIONS - MedicalMetMat”, within PNCDI III.en_US
dc.identifier.external75402151-
dc.utils.revisionSíen_US
dc.identifier.conferenceidevents121662-
dc.identifier.ulpgcSíen_US
dc.contributor.buulpgcBU-INGen_US
item.grantfulltextopen-
item.fulltextCon texto completo-
crisitem.event.eventsstartdate16-05-2019-
crisitem.event.eventsenddate17-05-2019-
crisitem.author.deptGIR Nanomaterials and Corrosion-
crisitem.author.deptDepartamento de Ingeniería Mecánica-
crisitem.author.orcid0000-0003-0623-3318-
crisitem.author.parentorgDepartamento de Ingeniería Mecánica-
crisitem.author.fullNameMirza Rosca, Julia Claudia-
Appears in Collections:Actas de congresos
Adobe PDF (910,35 kB)
Show simple item record

Google ScholarTM

Check

Altmetric


Share


Export metadata


Items in accedaCRIS are protected by copyright, with all rights reserved, unless otherwise indicated.