|Title:||Measurement of VLE data by using an experimental installation with automatic control: modeling of binary systems of methyl acetate or ethyl acetate with n-Heptane or 2,2,4-Trimethylpentane at Both 0.1 and 1.5 MPa||Authors:||Susial Badajoz, Pedro
|UNESCO Clasification:||3303 ingeniería y tecnología químicas||Keywords:||Vapor-Liquid-Equilibria
Thermodynamic Consistency Test
Perturbed-Chain Saft, et al
|Issue Date:||2019||Journal:||Journal of Chemical & Engineering Data||Abstract:||The excess volume of binary mixtures and the isobaric vapor-liquid equilibrium (VLE) data at high pressure have been determined. The VLE values for methyl acetate + n-heptane or 2,2,4-trimethylpentane and ethyl acetate + n-heptane or 2,2,4-trimethylpentane at different pressures were obtained experimentally using a stainless steel ebulliometer. The experimental data at 0.1 MPa were verified by using the point-to-point test. The high pressure data were verified by employing the φ-φ approximation. The equations of state (EOSs) of Peng-Robinson-Stryjek-Vera, with both quadratic or Wong-Sandler mixing rules, and the PC-SAFT were applied for modeling purposes. It has been verified that the azeotropic point in the binary mixtures of this work was eliminated by increasing the pressure.||URI:||http://hdl.handle.net/10553/58015||ISSN:||0021-9568||DOI:||10.1021/acs.jced.9b00668||Source:||Journal of Chemical and Engineering Data [ISSN 0021-9568], vol. 64(12), p. 5591-5608|
|Appears in Collections:||Artículos|
Items in accedaCRIS are protected by copyright, with all rights reserved, unless otherwise indicated.