Identificador persistente para citar o vincular este elemento: http://hdl.handle.net/10553/45823
Título: Design-optimized and operational features to improve the economic results of fishing vessels
Autores/as: Martínez-López, Alba 
Míguez-González, Marcos
Díaz-Casás, Vicente
Fariñas-Alvariño, Pablo
Clasificación UNESCO: 3313 Tecnología e ingeniería mecánicas
3319 Tecnología naval
Palabras clave: Feasibility plan for fishing vessels
Improvements in fishing vessels
Design requirements for fishing vessels
Fecha de publicación: 2012
Editor/a: 1475-0902
Publicación seriada: Proceedings of the Institution of Mechanical Engineers Part M: Journal of Engineering for the Maritime Environment 
Resumen: The main objectives of this paper are to define the design parameters and operational features for new fishing vessels in order to increase their economic profitability. Thus, an economic model of their activity has been developed by taking into account the activity of the Galician fleet (Spain) for the last 7 years. Subsequently, the influence of each variable has been evaluated through the application of Monte Carlo simulation for each type of fishing vessel. Once the controllable and market variables in the model have been identified, the quantification of their influence on the economic result has been carried out. From data provided by the shipowners using the Port of Celeiro, this study also identifies a large oversize both in the hold and in the fuel capacity of the current fleet. According to the results obtained, new main dimensions and operational features for the vessels are proposed, with the objective of improving the economic feasibility of these vessels. The analysis shows the great importance of the market parameters and the initial investment in the final economic results. The longliner is the vessel that is the most sensitive to the solutions proposed, obtaining the largest improvements through smaller vessels operating at a lower speed during the trip.
URI: http://hdl.handle.net/10553/45823
ISSN: 1475-0902
DOI: 10.1177/1475090211422971
Fuente: Proceedings of the Institution of Mechanical Engineers Part M: Journal of Engineering for the Maritime Environment[ISSN 1475-0902],v. 226, p. 51-61
Colección:Artículos
Vista completa

Citas SCOPUSTM   

5
actualizado el 24-nov-2024

Citas de WEB OF SCIENCETM
Citations

3
actualizado el 24-nov-2024

Visitas

98
actualizado el 02-mar-2024

Google ScholarTM

Verifica

Altmetric


Comparte



Exporta metadatos



Los elementos en ULPGC accedaCRIS están protegidos por derechos de autor con todos los derechos reservados, a menos que se indique lo contrario.