Please use this identifier to cite or link to this item: http://hdl.handle.net/10553/42668
DC FieldValueLanguage
dc.contributor.authorMonzón, Marioen_US
dc.contributor.authorHernández Castellano, Pedro Manuelen_US
dc.contributor.authorBenítez, Antonio N.en_US
dc.contributor.authorMarrero Alemán, María Doloresen_US
dc.contributor.authorFernández, Ángelen_US
dc.date.accessioned2018-11-21T10:35:39Z-
dc.date.available2018-11-21T10:35:39Z-
dc.date.issued2009en_US
dc.identifier.issn1007-0214en_US
dc.identifier.urihttp://hdl.handle.net/10553/42668-
dc.description.abstractOne of the most important issues to resolve in parts manufactured from rapid manufacturing (RM) technologies is to know their behavior working under real conditions. Total quality manufacturing (TQM) is only possible if mechanical properties are well known in the design stage depending on the processing parameters. This work is mainly focused on testing of several samples made with different selective laser sintering (SLS) parameters and technologies. This procedure is the starting point to establish a basis for designing for RM and the standardization of RM testing. The experiments and the analysis of variance (ANOVA) analyzed the effects of several factors on mechanical properties. The SLS technologies were 3DSystem and EOS. The results show which factor has a large effect on the variables and the interaction between them. The conclusions are very useful for developing rules for designing (designing for RM) and creating new standard rules (ISO, AISI, and DIN) for RM materials and parts testing. The ANOVA gives a better knowledge of the effects of these factors and eliminates unimportant parameters.en_US
dc.languageengen_US
dc.publisher1007-0214-
dc.relation.ispartofTsinghua Science and Technologyen_US
dc.sourceTsinghua Science and Technology[ISSN 1007-0214],v. 14, p. 100-107en_US
dc.subject331212 Ensayo de materialesen_US
dc.subject.otherLaser sinteringen_US
dc.subject.otherRapid manufacturing (RM)en_US
dc.subject.otherAnalysis of variance (ANOVA)en_US
dc.subject.otherRapid prototypingen_US
dc.subject.otherAdditive manufacturingen_US
dc.subject.otherSelective laser sintering (SLS)en_US
dc.titlePredictability of Plastic Parts Behaviour Made from Rapid Manufacturingen_US
dc.typeinfo:eu-repo/semantics/Articlees
dc.typeArticlees
dc.identifier.doi10.1016/S1007-0214(09)70075-6
dc.identifier.scopus67650725378-
dc.contributor.authorscopusid7003371153-
dc.contributor.authorscopusid8372557600-
dc.contributor.authorscopusid57210096811
dc.contributor.authorscopusid13805747600-
dc.contributor.authorscopusid8372557400-
dc.contributor.authorscopusid36677274900-
dc.description.lastpage107-
dc.description.firstpage100-
dc.relation.volume14-
dc.investigacionIngeniería y Arquitecturaen_US
dc.type2Artículoen_US
dc.utils.revisionen_US
dc.date.coverdateJunio 2009
dc.identifier.ulpgces
dc.description.scieSCIE
item.grantfulltextnone-
item.fulltextSin texto completo-
crisitem.author.deptGIR Fabricación integrada y avanzada-
crisitem.author.deptDepartamento de Ingeniería Mecánica-
crisitem.author.deptGIR Fabricación integrada y avanzada-
crisitem.author.deptDepartamento de Ingeniería Mecánica-
crisitem.author.deptGIR Fabricación integrada y avanzada-
crisitem.author.deptDepartamento de Ingeniería de Procesos-
crisitem.author.deptGIR Fabricación integrada y avanzada-
crisitem.author.deptDepartamento de Ingeniería Mecánica-
crisitem.author.orcid0000-0003-2736-7905-
crisitem.author.orcid0000-0001-8443-118X-
crisitem.author.orcid0000-0001-5711-6395-
crisitem.author.orcid0000-0002-9396-1649-
crisitem.author.parentorgDepartamento de Ingeniería Mecánica-
crisitem.author.parentorgDepartamento de Ingeniería Mecánica-
crisitem.author.parentorgDepartamento de Ingeniería Mecánica-
crisitem.author.parentorgDepartamento de Ingeniería Mecánica-
crisitem.author.fullNameMonzón Verona, Mario Domingo-
crisitem.author.fullNameHernández Castellano, Pedro Manuel-
crisitem.author.fullNameBenítez Vega, Antonio Nizardo-
crisitem.author.fullNameMarrero Alemán, María Dolores-
crisitem.author.fullNameRodríguez Fernández, Ángel José-
Appears in Collections:Artículos
Show simple item record

SCOPUSTM   
Citations

14
checked on Mar 24, 2024

Page view(s)

72
checked on May 27, 2023

Google ScholarTM

Check

Altmetric


Share



Export metadata



Items in accedaCRIS are protected by copyright, with all rights reserved, unless otherwise indicated.