Please use this identifier to cite or link to this item: http://hdl.handle.net/10553/42650
DC FieldValueLanguage
dc.contributor.authorOrtega, Z.en_US
dc.contributor.authorMonzón, M. D.en_US
dc.contributor.authorBenítez, A. N.en_US
dc.contributor.authorTcharkhtchi, A.en_US
dc.contributor.authorFarzaneh, S.en_US
dc.date.accessioned2018-11-21T10:31:22Z-
dc.date.available2018-11-21T10:31:22Z-
dc.date.issued2014en_US
dc.identifier.isbn9780000000002en_US
dc.identifier.urihttp://hdl.handle.net/10553/42650-
dc.description.abstractThis research focus on the characterization of banana and abaca reinforced composites obtained by rotomoulding. These composites were characterized by mechanical tests (tensile, flexural, impact and DMA), DSC and optical microscopy. This paper shows the results obtained when testing these composites with a microtensile tester, observing the failures method. Differences between both types of fiber have be en observed, showing different compatibility of these fibers with the polymeric matrix; chemical treatments also influence the behavior observed at failure. Banana and treated abaca fibers break in the PE matrix, while pull -out effect was observed for abaca fiber.en_US
dc.languageengen_US
dc.relation.ispartof16th European Conference on Composite Materials, ECCM 2014en_US
dc.source16th European Conference on Composite Materials, ECCM 2014en_US
dc.subject3312 Tecnología de materialesen_US
dc.subject3322 Tecnología energéticaen_US
dc.subject.othernatural fibesen_US
dc.subject.otherrot omouldingen_US
dc.subject.othermicrotensile video testsen_US
dc.subject.othercomposites failureen_US
dc.titleBanana and abaca reinforced polyethylene composites microtensile video testsen_US
dc.typeinfo:eu-repo/semantics/conferenceObjectes
dc.typeConferenceObjectes
dc.relation.conference16th European Conference on Composite Materials, ECCM 2014
dc.identifier.scopus84915757901-
dc.contributor.authorscopusid36241994700-
dc.contributor.authorscopusid7003371153-
dc.contributor.authorscopusid57210096811
dc.contributor.authorscopusid13805747600-
dc.contributor.authorscopusid57203840574-
dc.contributor.authorscopusid8643300400-
dc.investigacionIngeniería y Arquitecturaen_US
dc.type2Actas de congresosen_US
dc.date.coverdateEnero 2014
dc.identifier.conferenceidevents121533
dc.identifier.ulpgces
item.grantfulltextnone-
item.fulltextSin texto completo-
crisitem.author.deptGIR Fabricación integrada y avanzada-
crisitem.author.deptDepartamento de Ingeniería de Procesos-
crisitem.author.deptGIR Fabricación integrada y avanzada-
crisitem.author.deptDepartamento de Ingeniería Mecánica-
crisitem.author.deptGIR Fabricación integrada y avanzada-
crisitem.author.deptDepartamento de Ingeniería de Procesos-
crisitem.author.orcid0000-0002-7112-1067-
crisitem.author.orcid0000-0003-2736-7905-
crisitem.author.orcid0000-0001-5711-6395-
crisitem.author.parentorgDepartamento de Ingeniería Mecánica-
crisitem.author.parentorgDepartamento de Ingeniería Mecánica-
crisitem.author.parentorgDepartamento de Ingeniería Mecánica-
crisitem.author.fullNameOrtega Medina, Zaida Cristina-
crisitem.author.fullNameMonzón Verona, Mario Domingo-
crisitem.author.fullNameBenítez Vega, Antonio Nizardo-
crisitem.event.eventsstartdate20-07-2014-
crisitem.event.eventsenddate25-07-2014-
Appears in Collections:Actas de congresos
Show simple item record

Google ScholarTM

Check

Altmetric


Share



Export metadata



Items in accedaCRIS are protected by copyright, with all rights reserved, unless otherwise indicated.