1. accedaCRIS
  2. Publicaciones
  3. Artículos
Please use this identifier to cite or link to this item: http://hdl.handle.net/10553/42478
DC FieldValueLanguage
dc.contributor.authorOrtega, Zaitaen_US
dc.contributor.authorDíaz, N.en_US
dc.contributor.authorAlemán-Domínguez, M. E.en_US
dc.contributor.authorRomero, A.en_US
dc.contributor.authorMonzón, M. D.en_US
dc.contributor.authorGómez-Tejedor, J.A.en_US
dc.date.accessioned2018-11-15T20:02:01Z-
dc.date.available2018-11-15T20:02:01Z-
dc.date.issued2016en_US
dc.identifier.issn0930-777Xen_US
dc.identifier.urihttp://hdl.handle.net/10553/42478-
dc.description.abstractIn this study, the feasibility of obtaining superhydrophobic polyethylene parts by rotational molding has been confirmed. The superhydrophobicity is obtained through the surface modification of the thermoplastic by using a microrough aluminium mold. The treatment used to create the microroughness of the mold was an electrochemical process followed by heating at 180 ˚C. Once the superhydrophobic aluminium mold has been prepared, several rotomolding cycles were carried out. The mold was then used for obtaining rotomolded test cube parts using a conventional polyethylene grade. The behavior of the parts under a water jet show a superhydrophobic behavior of the surface, fact confirmed by the measurement of contact angles above 145˚.en_US
dc.languageengen_US
dc.relation.ispartofInternational Polymer Processingen_US
dc.sourceInternational Polymer Processing[ISSN 0930-777X],v. 31, p. 104-107en_US
dc.subject331210 Plásticosen_US
dc.subject3312 Tecnología de materialesen_US
dc.subject.otherAluminum
dc.subject.otherSurface
dc.titleFabrication of superhydrophobic polyethylene parts by rotomoldingen_US
dc.typeinfo:eu-repo/semantics/Articlees
dc.typeArticlees
dc.identifier.doi10.3139/217.3161
dc.identifier.scopus84964754622-
dc.identifier.isi000372022300011
dc.contributor.authorscopusid36241994700
dc.contributor.authorscopusid7005524486
dc.contributor.authorscopusid56097219900
dc.contributor.authorscopusid57189027292
dc.contributor.authorscopusid57208382304
dc.contributor.authorscopusid7003371153
dc.contributor.authorscopusid55915419300
dc.description.lastpage107-
dc.identifier.issue1-
dc.description.firstpage104-
dc.relation.volume31-
dc.investigacionIngeniería y Arquitecturaen_US
dc.type2Artículoen_US
dc.contributor.daisngid2273115
dc.contributor.daisngid4226768
dc.contributor.daisngid8698575
dc.contributor.daisngid22885862
dc.contributor.daisngid1363424
dc.contributor.daisngid4867206
dc.contributor.wosstandardWOS:Ortega, Z
dc.contributor.wosstandardWOS:Diaz, N
dc.contributor.wosstandardWOS:Aleman-Dominguez, ME
dc.contributor.wosstandardWOS:Romero, A
dc.contributor.wosstandardWOS:Monzon, MD
dc.contributor.wosstandardWOS:Gomez-Tejedor, JA
dc.date.coverdateMarzo 2016
dc.identifier.ulpgcSíes
dc.description.sjr0,247
dc.description.jcr0,634
dc.description.sjrqQ2
dc.description.jcrqQ4
dc.description.scieSCIE
item.grantfulltextnone-
item.fulltextSin texto completo-
crisitem.author.deptGIR Fabricación integrada y avanzada-
crisitem.author.deptDepartamento de Ingeniería de Procesos-
crisitem.author.deptGIR Fabricación integrada y avanzada-
crisitem.author.deptGIR Fabricación integrada y avanzada-
crisitem.author.deptGIR Fabricación integrada y avanzada-
crisitem.author.deptDepartamento de Ingeniería Mecánica-
crisitem.author.orcid0000-0002-7112-1067-
crisitem.author.orcid0000-0002-1461-7752-
crisitem.author.orcid0000-0002-2254-9905-
crisitem.author.orcid0000-0003-2736-7905-
crisitem.author.parentorgDepartamento de Ingeniería Mecánica-
crisitem.author.parentorgDepartamento de Ingeniería Mecánica-
crisitem.author.parentorgDepartamento de Ingeniería Mecánica-
crisitem.author.parentorgDepartamento de Ingeniería Mecánica-
crisitem.author.fullNameOrtega Medina, Zaida Cristina-
crisitem.author.fullNameDíaz Padilla,Noelia Del Carmen-
crisitem.author.fullNameAleman Dominguez,Maria Elena-
crisitem.author.fullNameMonzón Verona, Mario Domingo-
Appears in Collections:Artículos
Show simple item record

SCOPUSTM   
Citations

2
checked on Apr 14, 2024

WEB OF SCIENCETM
Citations

2
checked on Feb 25, 2024

Page view(s)

22
checked on Oct 29, 2022

Google ScholarTM

Check

Altmetric


Share


Export metadata


Items in accedaCRIS are protected by copyright, with all rights reserved, unless otherwise indicated.