Please use this identifier to cite or link to this item: http://hdl.handle.net/10553/42026
Campo DC Valoridioma
dc.contributor.authorYánez, A.en_US
dc.contributor.authorHerrera, A.en_US
dc.contributor.authorMartel, O.en_US
dc.contributor.authorMonopoli, D.en_US
dc.contributor.authorAfonso, H.en_US
dc.date.accessioned2018-09-28T12:31:35Z-
dc.date.available2018-09-28T12:31:35Z-
dc.date.issued2016en_US
dc.identifier.issn0928-4931en_US
dc.identifier.urihttp://hdl.handle.net/10553/42026-
dc.description.abstractElectron beam melting (EBM) was used to fabricate porous titanium alloy structures. The elastic modulus of these porous structures was similar to the elastic modulus of the cancellous human bone. Two types of cellular lattice structures were manufactured and tested: gyroids and diamonds. The design of the gyroid structures was determined by the main angle of the struts with respect to the axial direction. Thus, structures with angles of between 19 and 68.5° were manufactured. The aim of the design was to reduce the amount of material needed to fabricate a structure with the desired angles to increase the range of stiffness of the scaffolds. Compression tests were conducted to obtain the elastic modulus and the strength. Both parameters increased as the angle decreased. Finally, the specific strength of the gyroid structures was compared with that of the diamond structures and other types of structures. It is shown that, for angles lower than 35°, the gyroid structures had a high strength to weight ratios.en_US
dc.languageengen_US
dc.relation.ispartofMaterials Science and Engineering Cen_US
dc.sourceMaterials Science and Engineering C[ISSN 0928-4931],v. 68, p. 445-448en_US
dc.subject3314 Tecnología médicaen_US
dc.subject321315 Traumatologíaen_US
dc.subject.otherCompressive behaviouren_US
dc.subject.otherElectron beam meltingen_US
dc.subject.otherGyroid lattice structuresen_US
dc.subject.otherSpecific strengthen_US
dc.subject.otherTitanium alloysen_US
dc.titleCompressive behaviour of gyroid lattice structures for human cancellous bone implant applicationsen_US
dc.typeinfo:eu-repo/semantics/Articleen_US
dc.typeArticleen_US
dc.identifier.doi10.1016/j.msec.2016.06.016en_US
dc.identifier.scopus84973861949-
dc.identifier.isi000382600000052-
dc.contributor.authorscopusid56423836100-
dc.contributor.authorscopusid57213770028-
dc.contributor.authorscopusid57193164769-
dc.contributor.authorscopusid15048342800-
dc.contributor.authorscopusid56373787900-
dc.contributor.authorscopusid6506915210-
dc.description.lastpage448en_US
dc.description.firstpage445en_US
dc.relation.volume68en_US
dc.investigacionIngeniería y Arquitecturaen_US
dc.type2Artículoen_US
dc.contributor.daisngid35037967-
dc.contributor.daisngid30030559-
dc.contributor.daisngid12629772-
dc.contributor.daisngid8479022-
dc.contributor.daisngid4754957-
dc.description.numberofpages4en_US
dc.utils.revisionen_US
dc.contributor.wosstandardWOS:Yanez, A-
dc.contributor.wosstandardWOS:Herrera, A-
dc.contributor.wosstandardWOS:Martel, O-
dc.contributor.wosstandardWOS:Monopoli, D-
dc.contributor.wosstandardWOS:Afonso, H-
dc.date.coverdateNoviembre 2016en_US
dc.identifier.ulpgcen_US
dc.description.sjr0,857-
dc.description.jcr4,164-
dc.description.sjrqQ1-
dc.description.jcrqQ2-
dc.description.scieSCIE-
item.grantfulltextopen-
item.fulltextCon texto completo-
crisitem.author.deptGIR Biomaterials and Biomechanics Research Group-
crisitem.author.deptDepartamento de Ingeniería Mecánica-
crisitem.author.deptGIR ECOAQUA: Ecofisiología de Organismos Marinos-
crisitem.author.deptIU de Investigación en Acuicultura Sostenible y Ec-
crisitem.author.deptDepartamento de Biología-
crisitem.author.deptGIR Biomaterials and Biomechanics Research Group-
crisitem.author.deptDepartamento de Ingeniería Mecánica-
crisitem.author.orcid0000-0002-1736-552X-
crisitem.author.orcid0000-0002-5538-6161-
crisitem.author.orcid0000-0003-3806-5523-
crisitem.author.parentorgDepartamento de Ingeniería Mecánica-
crisitem.author.parentorgIU de Investigación en Acuicultura Sostenible y Ec-
crisitem.author.parentorgDepartamento de Ingeniería Mecánica-
crisitem.author.fullNameYánez Santana, Manuel Alejandro-
crisitem.author.fullNameHerrera Ulibarri, Alicia Andrea-
crisitem.author.fullNameMartel Fuentes, Oscar-
Colección:Artículos
pdf
Adobe PDF (521,66 kB)
Vista resumida

Citas SCOPUSTM   

129
actualizado el 30-mar-2025

Citas de WEB OF SCIENCETM
Citations

114
actualizado el 30-mar-2025

Visitas

93
actualizado el 27-jul-2024

Google ScholarTM

Verifica

Altmetric


Comparte



Exporta metadatos



Los elementos en ULPGC accedaCRIS están protegidos por derechos de autor con todos los derechos reservados, a menos que se indique lo contrario.