Identificador persistente para citar o vincular este elemento: http://hdl.handle.net/10553/131196
Título: Analysis of greenhouse gas emissions and the environmental impact of the production of asphalt mixes modified with recycled materials
Autores/as: Movilla-Quesada, Diana
Lagos-Varas, Manuel
Raposeiras, Aitor C.
Muñoz-Cáceres, Osvaldo
Andres Valeri, Valerio Carlos 
Aguilar-Vidal, Carla
Clasificación UNESCO: 330506 Ingeniería civil
Palabras clave: Asphalt mixes
Environmental impact
Greenhouse gas emission
Industrial by-product
Waste
Fecha de publicación: 2021
Publicación seriada: Sustainability (Switzerland) 
Resumen: This research focuses on the production and construction stages of the life cycle analysis (LCA) of asphalt mixtures modified with industrial waste and by-products, based on the quantification of methane (CH4 ), carbon monoxide (CO) and carbon dioxide (CO2 ) emissions produced during these processes. A laboratory-designed and calibrated gas measurement system with a microcontroller and MQ sensors is used to compare the emissions (GHG) of a “conventional” asphalt mix with those emitted by waste-modified asphalt mixes (polyethylene terephthalate and nylon fibres) and industrial by-products (copper slag and cellulose ash). The results obtained show that the gases emitted by each type of material can influence the design criteria from an environmental perspective. Methane gas emissions for asphalt mixes made with polymeric materials increase compared to the production phase of a conventional mix (M1) by 21% for PET and 14% for nylon. In contrast, for mixtures made with copper slag and cellulose ash, this emission is reduced by 12%. In addition, the use of copper slag and cellulose ash to replace natural aggregates reduces greenhouse gas emissions by 15% during the production phase and contributes to the creation of photochemical ozone for a shorter period of time. Regarding carbon dioxide emission, it increases considerably for all asphalt mixes, by 26% and 44.5% for cellulose ash and copper slag, respectively. For asphalt mixtures made of polymeric materials, the increase in carbon dioxide emission is significant, 130% for PET and 53% for nylon. In addition, it is noted that for this type of material, not only the emission of the gas must be taken into consideration, but also the time that the volatile particles spend in the atmosphere, affecting climate change and photochemical ozone (smog). The carbon monoxide gases emitted in the production phase of all the asphalt mixes analysed is similar among them.
URI: http://hdl.handle.net/10553/131196
ISSN: 2071-1050
DOI: 10.3390/su13148081
Fuente: Sustainability [2071-1050]. v. 13 (14), 8081, (Julio 2021)
Colección:Artículos
Adobe PDF (1,96 MB)
Vista completa

Citas SCOPUSTM   

11
actualizado el 10-nov-2024

Citas de WEB OF SCIENCETM
Citations

12
actualizado el 10-nov-2024

Visitas

30
actualizado el 28-sep-2024

Descargas

23
actualizado el 28-sep-2024

Google ScholarTM

Verifica

Altmetric


Comparte



Exporta metadatos



Los elementos en ULPGC accedaCRIS están protegidos por derechos de autor con todos los derechos reservados, a menos que se indique lo contrario.