Please use this identifier to cite or link to this item: http://hdl.handle.net/10553/128201
DC FieldValueLanguage
dc.contributor.authorVoiculescu,Ioneliaen_US
dc.contributor.authorBrito Garcia,Santiago Joseen_US
dc.contributor.authorGonzález Díaz, Oscar Manuelen_US
dc.contributor.authorMirza Rosca, Julia Claudiaen_US
dc.date.accessioned2024-01-02T13:44:05Z-
dc.date.available2024-01-02T13:44:05Z-
dc.date.issued2023en_US
dc.identifier.issn2075-4701en_US
dc.identifier.urihttp://hdl.handle.net/10553/128201-
dc.description.abstractWhile Ti6Al4V is one of the most used titanium alloys in the biomaterials field, it is not without its challenges and limitations, among which very important is the modulus mismatch with the bone. This modulus mismatch can lead to stress shielding potentially leading to bone resorption and implant loosening. Researchers continue to explore alternative materials and modifications to address this challenge and improve the performance of biomaterials. Two new fabricated titanium alloys Ti-10Al and Ti-4Fe are analyzed in this paper from corrosion and elastic modulus points of view. Metallography, microhardness, open circuit potential, DC electrochemical linear polarization, and Electrochemical Impedance Spectroscopy were performed. It was found that the corrosion resistance measurement for the Ti4Fe alloy is two orders of magnitude lower than for the Ti10Al alloy as determined by the equivalent circuit simulation, which is also supported by the similar disparity in the corrosion rate values for the two alloys which was determined using the DC method. The modulus of elasticity values were fairly close, hovering about 35GPa, and were lower than those of many commercial alloys.en_US
dc.languagespaen_US
dc.relation.ispartofMetalsen_US
dc.sourceMetals [2075-4701], v. 13, Issue 10, (Octubre 2023)en_US
dc.subject3312 Tecnología de materialesen_US
dc.subject.otherTi10Alen_US
dc.subject.otherTi4Feen_US
dc.subject.othermetallographyen_US
dc.subject.othercorrosionen_US
dc.subject.otherEISen_US
dc.titleMechanical Characteristics and Corrosion Behavior of Two New Titanium Alloysen_US
dc.typeinfo:eu-repo/semantics/articleen_US
dc.typeArticleen_US
dc.identifier.doi10.3390/met13101729en_US
dc.identifier.scopus2-s2.0-85175089188-
dc.identifier.isiWOS:001089804100001-
dc.contributor.orcid0000-0002-9065-3587-
dc.contributor.orcid0000-0002-3976-2411-
dc.contributor.orcid0000-0003-0876-8121-
dc.contributor.orcid0000-0003-0623-3318-
dc.identifier.issue10-
dc.relation.volume13en_US
dc.investigacionIngeniería y Arquitecturaen_US
dc.type2Artículoen_US
dc.description.numberofpages14en_US
dc.utils.revisionen_US
dc.date.coverdateOctubre 2023en_US
dc.identifier.ulpgcen_US
dc.contributor.buulpgcBU-INGen_US
dc.description.sjr0,554
dc.description.jcr2,9
dc.description.sjrqQ1
dc.description.jcrqQ2
dc.description.scieSCIE
dc.description.miaricds10,5
item.grantfulltextopen-
item.fulltextCon texto completo-
crisitem.author.deptGIR Nanomaterials and Corrosion-
crisitem.author.deptGIR Nanomaterials and Corrosion-
crisitem.author.deptGIR IUNAT: Fotocatálisis y espectroscopía para aplicaciones medioambientales.-
crisitem.author.deptIU de Estudios Ambientales y Recursos Naturales-
crisitem.author.deptDepartamento de Química-
crisitem.author.deptGIR Nanomaterials and Corrosion-
crisitem.author.deptDepartamento de Ingeniería Mecánica-
crisitem.author.orcid0000-0002-3976-2411-
crisitem.author.orcid0000-0003-0876-8121-
crisitem.author.orcid0000-0003-0623-3318-
crisitem.author.parentorgDepartamento de Ingeniería Mecánica-
crisitem.author.parentorgDepartamento de Ingeniería Mecánica-
crisitem.author.parentorgIU de Estudios Ambientales y Recursos Naturales-
crisitem.author.parentorgDepartamento de Ingeniería Mecánica-
crisitem.author.fullNameVoiculescu, Ionelia-
crisitem.author.fullNameBrito Garcia,Santiago Jose-
crisitem.author.fullNameGonzález Díaz, Oscar Manuel-
crisitem.author.fullNameMirza Rosca, Julia Claudia-
Appears in Collections:Artículos
Adobe PDF (3,49 MB)
Show simple item record

SCOPUSTM   
Citations

1
checked on Nov 24, 2024

WEB OF SCIENCETM
Citations

1
checked on Nov 24, 2024

Page view(s)

41
checked on Apr 27, 2024

Download(s)

11
checked on Apr 27, 2024

Google ScholarTM

Check

Altmetric


Share



Export metadata



Items in accedaCRIS are protected by copyright, with all rights reserved, unless otherwise indicated.