Please use this identifier to cite or link to this item: http://hdl.handle.net/10553/117712
Title: Effects and Comparison of the Characteristics of Ni-Cr and Co-Cr Dental Alloys
Authors: Jiménez Marcos, Cristina
Florido-Suárez, Néstor R. 
Mirza Rosca, Julia Claudia 
Saceleanu, Adriana
UNESCO Clasification: 3314 Tecnología médica
Keywords: Biomaterial
Corrosion test
Metallographic test
Three-point bending test
Dental alloys
Issue Date: 2022
Project: project number CABINFR2019-07
Conference: 8 th International Conference on Innovative Research (ICIR EUROINVENT 2022) 
Abstract: Due to the increasing research on biocompatibility and the use of dental alloys for bridges, crowns and prostheses, it was decided to compare the corrosion effects and mechanical properties of two samples based on Co- Cr and Ni-Cr, using metallography, electrochemical and three-point bending tests. Before applying the study techniques, the surfaces of the samples were prepared by cutting, mounting and subsequent polishing. This last step was performed using progressive grain silicon carbide grinding papers and 0.1 micrometers alumina suspension [1]. Also, the samples were then immersed in an ultrasonic machine to remove all traces of dirt and chemically etched. After the application of the techniques, the metallographic test showed the crystalline structures of both dental alloys, as well as some porosities and defects. In the corrosion potential test, the samples tend to passivate and, when applying the Electrochemical Impedance Spectroscopy technique, it was observed that the corrosion resistance increases the more positive the applied potential and the higher the impedance and phase angle values, so the Co-Cr alloy presents a better corrosion resistance. On the other hand, in the threepoint bending test, the Co-Cr alloy has the lowest modulus of elasticity values.
URI: http://hdl.handle.net/10553/117712
ISSN: 2601-4599
Source: 8 th International Conference on Innovative Research (ICIR EUROINVENT 2022), p. 40
Appears in Collections:Actas de congresos
Adobe PDF (140 kB)
Show full item record

Google ScholarTM

Check


Share



Export metadata



Items in accedaCRIS are protected by copyright, with all rights reserved, unless otherwise indicated.