Please use this identifier to cite or link to this item: http://hdl.handle.net/10553/112528
Title: In Vitro Testing of 2 Adjustable-Loop Cortical Suspensory Fixation Systems Versus Interference Screw for Anterior Cruciate Ligament Reconstruction
Authors: Garcés Martín, Gerardo 
Martel Fuentes, Oscar 
Yánez Santana, Manuel Alejandro 
Manchado Herrera, Ignacio 
Motta Da Rocha, Luci Mara 
UNESCO Clasification: 321315 Traumatología
Keywords: Biomechanical testing
Anterior cruciate ligament reconstruction
Suspensory fixation
Interference screw
Issue Date: 2021
Journal: Orthopaedic Journal of Sports Medicine 
Abstract: Background: It is not clear whether the mechanical strength of adjustable-loop suspension devices (ALDs) in anterior cruciate ligament (ACL) reconstruction is device dependent and if these constructs are different from those of an interference screw. Purpose: To compare the biomechanical differences of 2 types of ALDs versus an interference screw. Study Design: Controlled laboratory study. Methods: ACL reconstruction was performed on porcine femurs and bovine extensor tendons with 3 types of fixation devices: interference screw, UltraButton (UB) ALD, and TightRope (TR) ALD (n = 10 for each). In addition to specimen testing, isolated testing of the 2 ALDs was performed. The loading protocol consisted of 3 stages: preload (static 150 N load for 5 minutes), cyclic load (50-250 N at 1 Hz for 1000 cycles), and load to failure (crosshead speed 50 mm/min). Displacement at different cycles, ultimate failure load, yield load, stiffness, and failure mode were recorded. Results: In specimen testing, displacement of the ALDs at the 1000th cycle was similar (3.42 ± 1.34 mm for TR and 3.39 ± 0.92 mm for UB), but both were significantly lower than that of the interference screw (7.54 ± 3.18 mm) (P <.001 for both). The yield load of the UB (547 ± 173 N) was higher than that of the TR (420 ± 72 N) (P =.033) or the interference screw (386 ± 51 N; P =.013), with no significant difference between the latter 2. In isolated device testing, the ultimate failure load of the TR (862 ± 64 N) was significantly lower than that of the UB (1879 ± 126 N) (P <.001). Conclusion: Both ALDs showed significantly less displacement in cyclic loading at ultimate failure than the interference screw. The yield load of the UB was significantly higher than that of the other 2. The ultimate failure occurred at a significantly higher load for UB than it did for TR in isolated device testing. Clinical Relevance: Both UB and TR provided stronger fixation than an interference screw. Although difficult to assess, intrinsic differences in the mechanical properties of these ALDs may affect clinical outcomes.
URI: http://hdl.handle.net/10553/112528
ISSN: 2325-9671
DOI: 10.1177/23259671211031652
Source: Orthopaedic Journal of Sports Medicine [ISSN 2325-9671], v. 9 (9), (Septiembre 2021)
Appears in Collections:Artículos
Adobe PDF (278,45 kB)
Show full item record

SCOPUSTM   
Citations

7
checked on May 12, 2024

Page view(s)

70
checked on Apr 13, 2024

Download(s)

112
checked on Apr 13, 2024

Google ScholarTM

Check

Altmetric


Share



Export metadata



Items in accedaCRIS are protected by copyright, with all rights reserved, unless otherwise indicated.