Please use this identifier to cite or link to this item: http://hdl.handle.net/10553/112237
Title: Comparative EIS study of titanium-based materials in high corrosive environments
Authors: Socorro Perdomo, Pedro P. 
Florido Suárez, Néstor R. 
Verdú-Vázquez, Amparo
Mirza Rosca, Julia C. 
UNESCO Clasification: 3314 Tecnología médica
Keywords: Corrosion
EIS
Electrochemical impedance spectroscopy
Equivalent circuit
HCl, et al
Issue Date: 2021
Project: Microscopio Electronico Multifuncional 
Journal: International Journal of Surface Science and Engineering 
Abstract: Electrochemical impedance spectroscopy (EIS) is a technique relatively complex and modern that owes its existence to the emergence of electronic circuits. In this work, the behaviour in HCl 20% of three materials, Ti, Ti-15 Mo and Ti-15Mo-5Al fabricated by laser beam melting, was analysed using EIS. Impedance spectra have been obtained at various potentials, from open circuit potential to +2.0 V vs. Ref. Once the profiles of the impedance spectra were analysed, the experimental data were adjusted to an equivalent electrical model. Two models of equivalent circuits were presented: at Ecorr simple circuit is used while in the passive potential range an equivalent circuit with 2-time constants was used for fit the experimental data. It was concluded that titanium and studied titanium alloys undergo spontaneous passivation due to the oxide film formed on their surface in the reducing acid solution.
URI: http://hdl.handle.net/10553/112237
ISSN: 1749-785X
DOI: 10.1504/IJSURFSE.2021.116333
Source: International Journal of Surface Science and Engineering [ISSN 1749-785X], v. 15 (2) (Julio 2021)
Appears in Collections:Artículos
Adobe PDF (664,42 kB)
Show full item record

SCOPUSTM   
Citations

1
checked on Dec 5, 2021

Google ScholarTM

Check

Altmetric


Share



Export metadata



Items in accedaCRIS are protected by copyright, with all rights reserved, unless otherwise indicated.