Identificador persistente para citar o vincular este elemento:
http://hdl.handle.net/10553/72926
| Campo DC | Valor | idioma |
|---|---|---|
| dc.contributor.author | Yánez Santana, Manuel Alejandro | en_US |
| dc.contributor.author | Fiorucci, Maria Paula | en_US |
| dc.contributor.author | Cuadrado Hernández, Alberto Javier | en_US |
| dc.contributor.author | Martel Fuentes, Oscar | en_US |
| dc.contributor.author | Monopoli, Donato | en_US |
| dc.date.accessioned | 2020-06-03T10:47:27Z | - |
| dc.date.available | 2020-06-03T10:47:27Z | - |
| dc.date.issued | 2020 | en_US |
| dc.identifier.issn | 0142-1123 | en_US |
| dc.identifier.other | Scopus | - |
| dc.identifier.other | WoS | - |
| dc.identifier.uri | http://hdl.handle.net/10553/72926 | - |
| dc.description.abstract | Surface roughness effects on the fatigue behaviour of gyroid cellular Ti-6Al-4 V structures obtained by additive manufacturing were investigated. The normalized fatigue strength values for 10^6 cycles, obtained from the S-N curves, were in the range of 0.21–0.23. Finite element analyses showed that stress peak points were located on the stress concentrators due to surface defects, and scanning electron microscopy images showed that crack initiation was located at the surface. It is concluded that the expected good fatigue behaviour due to the curvature in the junctions of the struts, is diminished because of the superficial roughness contributing to the notch effect. | en_US |
| dc.language | eng | en_US |
| dc.relation | "Mejora de la osteointegración de estructuras porosas de titanio mediante la optimización del diseño y modificación superficial con recubrimiento polimerico". | en_US |
| dc.relation.ispartof | International Journal of Fatigue | en_US |
| dc.source | International Journal of Fatigue [ISSN 0142-1123], v. 138, 105702, (Septiembre 2020) | en_US |
| dc.subject | 33 Ciencias tecnológicas | en_US |
| dc.subject.other | Additive Manufacturing | en_US |
| dc.subject.other | Bone Tissue Scaffold | en_US |
| dc.subject.other | Fatigue Behaviour | en_US |
| dc.subject.other | Gyroid Cellular Structures | en_US |
| dc.subject.other | Surface Roughness | en_US |
| dc.title | Surface roughness effects on the fatigue behaviour of gyroid cellular structures obtained by additive manufacturing | en_US |
| dc.type | info:eu-repo/semantics/Article | en_US |
| dc.type | Article | en_US |
| dc.identifier.doi | 10.1016/j.ijfatigue.2020.105702 | en_US |
| dc.identifier.scopus | 85084950006 | - |
| dc.identifier.isi | 000540657100019 | - |
| dc.contributor.authorscopusid | 56423836100 | - |
| dc.contributor.authorscopusid | 57216845441 | - |
| dc.contributor.authorscopusid | 7005588567 | - |
| dc.contributor.authorscopusid | 15048342800 | - |
| dc.contributor.authorscopusid | 56373787900 | - |
| dc.identifier.eissn | 1879-3452 | - |
| dc.relation.volume | 138 | en_US |
| dc.investigacion | Ciencias | en_US |
| dc.type2 | Artículo | en_US |
| dc.contributor.daisngid | 36888704 | - |
| dc.contributor.daisngid | 1712677 | - |
| dc.contributor.daisngid | 35240833 | - |
| dc.contributor.daisngid | 16353036 | - |
| dc.contributor.daisngid | 40217817 | - |
| dc.description.numberofpages | 8 | en_US |
| dc.utils.revision | Sí | en_US |
| dc.contributor.wosstandard | WOS:Yanez, A | - |
| dc.contributor.wosstandard | WOS:Fiorucci, MP | - |
| dc.contributor.wosstandard | WOS:Cuadrado, A | - |
| dc.contributor.wosstandard | WOS:Martel, O | - |
| dc.contributor.wosstandard | WOS:Monopoli, D | - |
| dc.date.coverdate | Septiembre 2020 | en_US |
| dc.identifier.ulpgc | Sí | en_US |
| dc.contributor.buulpgc | BU-ING | en_US |
| dc.description.sjr | 1,669 | |
| dc.description.jcr | 5,186 | |
| dc.description.sjrq | Q1 | |
| dc.description.jcrq | Q1 | |
| dc.description.scie | SCIE | |
| item.fulltext | Con texto completo | - |
| item.grantfulltext | open | - |
| crisitem.project.principalinvestigator | Yánez Santana, Manuel Alejandro | - |
| crisitem.author.dept | GIR Biomaterials and Biomechanics Research Group | - |
| crisitem.author.dept | Departamento de Ingeniería Mecánica | - |
| crisitem.author.dept | GIR Biomaterials and Biomechanics Research Group | - |
| crisitem.author.dept | GIR Biomaterials and Biomechanics Research Group | - |
| crisitem.author.dept | Departamento de Ingeniería Mecánica | - |
| crisitem.author.dept | GIR Biomaterials and Biomechanics Research Group | - |
| crisitem.author.dept | Departamento de Ingeniería Mecánica | - |
| crisitem.author.orcid | 0000-0002-1736-552X | - |
| crisitem.author.orcid | 0000-0002-4532-7520 | - |
| crisitem.author.orcid | 0000-0002-8599-781X | - |
| crisitem.author.orcid | 0000-0003-3806-5523 | - |
| crisitem.author.parentorg | Departamento de Ingeniería Mecánica | - |
| crisitem.author.parentorg | Departamento de Ingeniería Mecánica | - |
| crisitem.author.parentorg | Departamento de Ingeniería Mecánica | - |
| crisitem.author.parentorg | Departamento de Ingeniería Mecánica | - |
| crisitem.author.fullName | Yánez Santana, Manuel Alejandro | - |
| crisitem.author.fullName | Fiorucci,Maria Paula | - |
| crisitem.author.fullName | Cuadrado Hernández, Alberto Javier | - |
| crisitem.author.fullName | Martel Fuentes, Oscar | - |
| Colección: | Artículos | |
Adobe PDF (1,2 MB)
Citas SCOPUSTM
70
actualizado el 30-mar-2025
Citas de WEB OF SCIENCETM
Citations
65
actualizado el 30-mar-2025
Visitas
243
actualizado el 11-ene-2025
Google ScholarTM
Verifica
Altmetric
Comparte
Exporta metadatos
Los elementos en ULPGC accedaCRIS están protegidos por derechos de autor con todos los derechos reservados, a menos que se indique lo contrario.