Please use this identifier to cite or link to this item: http://hdl.handle.net/10553/42664
DC FieldValueLanguage
dc.contributor.authorMonzón, M. D.en_US
dc.contributor.authorBenítez, A. N.en_US
dc.contributor.authorBordón, P.en_US
dc.contributor.authorHernández Castellano, Pedro Manuelen_US
dc.contributor.authorMarrero Alemán, María Doloresen_US
dc.contributor.authorOrtega, Fernandoen_US
dc.contributor.otherHernandez Castellano, Pedro Manuel-
dc.contributor.otherBenitez Vega, Antonio Nizardo-
dc.contributor.otherBenitez Vega, Antonio Nizardo-
dc.date.accessioned2018-11-21T10:34:43Z-
dc.date.available2018-11-21T10:34:43Z-
dc.date.issued2012en_US
dc.identifier.isbn978-0-7918-4427-4en_US
dc.identifier.urihttp://hdl.handle.net/10553/42664-
dc.description.abstractRotomoulded plastic parts have no internal stresses, as it is a process carried out at lower temperatures than injection moulding and no pressure is applied. The main disadvantage is the high cycle times needed. This paper focuses on reducing this cycle time and in producing a mould using standardized parts. For cycle time reducing, it is proposed to heat the mould by thermal fluid in continuous circulation; heat transfer processes have been studied for over 20 different configurations of the oil's inlet - outlet, obtaining acceptable results with a manifold with 25 perforations in the front and rear faces. This configuration has been optimized by computational fluids dynamics, allowing reducing heating and cooling time and improving the energetic efficiency and the uniformity of heating. Design, simulations and testing of a 100 mm3 cube have been carried out in order to produce a standardized mould; this mould consists in some standardized parts and a nickel shell, obtained by rapid prototyping and electroforming process. This shell can be removed from the rest of elements in the mould, allowing thus to obtain parts with any other geometry just by changing the nickel shell. An experimental machine for testing has been developed as well.en_US
dc.languageengen_US
dc.relation.ispartofProceedings Of The Asme International Mechanical Engineering Congress And Exposition 2010, Vol 3, Pts A And Ben_US
dc.sourceProceedings Of The Asme International Mechanical Engineering Congress And Exposition 2010, Vol 3, Pts A And B, p. 893-898en_US
dc.subject331210 Plásticosen_US
dc.subject331212 Ensayo de materialesen_US
dc.subject.otherRotational moldingen_US
dc.subject.otherPlastic productsen_US
dc.subject.otherPlastic productsen_US
dc.titleDesign and testing of innovative rotational mould heated by thermal fluiden_US
dc.typeinfo:eu-repo/semantics/conferenceObjecten_US
dc.typeConferenceObjecten_US
dc.relation.conferenceASME International Mechanical Engineering Congress and Exposition (IMECE)
dc.relation.conferenceASME 2010 International Mechanical Engineering Congress and Exposition, IMECE 2010
dc.identifier.doi10.1115/IMECE2010-39781
dc.identifier.scopus84881471919-
dc.identifier.isi000320286400107-
dcterms.isPartOfProceedings Of The Asme International Mechanical Engineering Congress And Exposition 2010, Vol 3, Pts A And B-
dcterms.sourceProceedings Of The Asme International Mechanical Engineering Congress And Exposition 2010, Vol 3, Pts A And B, p. 893-898-
dc.contributor.authorscopusid7003371153-
dc.contributor.authorscopusid57210096811
dc.contributor.authorscopusid13805747600-
dc.contributor.authorscopusid55332420200-
dc.contributor.authorscopusid8372557600-
dc.contributor.authorscopusid8372557400-
dc.contributor.authorscopusid56599899700-
dc.description.lastpage898-
dc.description.firstpage893-
dc.relation.volume3-
dc.investigacionIngeniería y Arquitecturaen_US
dc.type2Actas de congresosen_US
dc.identifier.wosWOS:000320286400107-
dc.contributor.daisngid1363424-
dc.contributor.daisngid579452-
dc.contributor.daisngid4180281-
dc.contributor.daisngid4734932
dc.contributor.daisngid1134948-
dc.contributor.daisngid2969956-
dc.contributor.daisngid28548091
dc.contributor.daisngid1044771-
dc.contributor.daisngid5820979
dc.identifier.investigatorRIDS-4525-2017-
dc.identifier.investigatorRIDNo ID-
dc.identifier.investigatorRIDNo ID-
dc.identifier.externalWOS:000320286400107-
dc.contributor.wosstandardWOS:Monzon, MD
dc.contributor.wosstandardWOS:Benitez, AN
dc.contributor.wosstandardWOS:Bordon, P
dc.contributor.wosstandardWOS:Hernandez, PM
dc.contributor.wosstandardWOS:Marrero, MD
dc.contributor.wosstandardWOS:Ortega, F
dc.date.coverdateDiciembre 2010
dc.identifier.conferenceidevents120828
dc.identifier.ulpgces
item.fulltextSin texto completo-
item.grantfulltextnone-
crisitem.event.eventsstartdate12-11-2010-
crisitem.event.eventsstartdate12-11-2010-
crisitem.event.eventsenddate18-11-2010-
crisitem.event.eventsenddate18-11-2010-
crisitem.author.deptFabricación integrada y avanzada-
crisitem.author.deptDepartamento de Ingeniería Mecánica-
crisitem.author.deptFabricación integrada y avanzada-
crisitem.author.deptDepartamento de Ingeniería de Procesos-
crisitem.author.deptDepartamento de Ingeniería Mecánica-
crisitem.author.deptFabricación integrada y avanzada-
crisitem.author.deptDepartamento de Ingeniería Mecánica-
crisitem.author.deptFabricación integrada y avanzada-
crisitem.author.deptDepartamento de Ingeniería Mecánica-
crisitem.author.deptFabricación integrada y avanzada-
crisitem.author.deptDepartamento de Ingeniería de Procesos-
crisitem.author.orcid0000-0003-2736-7905-
crisitem.author.orcid0000-0001-5711-6395-
crisitem.author.orcid0000-0001-8443-118X-
crisitem.author.orcidC0000-0002-9396-1649-
crisitem.author.orcid0000-0002-7112-1067-
crisitem.author.parentorgDepartamento de Ingeniería Mecánica-
crisitem.author.parentorgDepartamento de Ingeniería Mecánica-
crisitem.author.parentorgDepartamento de Ingeniería Mecánica-
crisitem.author.parentorgDepartamento de Ingeniería Mecánica-
crisitem.author.parentorgDepartamento de Ingeniería Mecánica-
crisitem.author.fullNameMonzón Verona, Mario Domingo-
crisitem.author.fullNameBenítez Vega, Antonio Nizardo-
crisitem.author.fullNameBordón Pérez, Pablo Rubén-
crisitem.author.fullNameHernández Castellano, Pedro Manuel-
crisitem.author.fullNameMarrero Alemán, María Dolores-
crisitem.author.fullNameOrtega Medina, Zaida Cristina-
Appears in Collections:Actas de congresos
Show simple item record

SCOPUSTM   
Citations

1
checked on Apr 18, 2021

Page view(s)

44
checked on Apr 18, 2021

Google ScholarTM

Check

Altmetric


Share



Export metadata



Items in accedaCRIS are protected by copyright, with all rights reserved, unless otherwise indicated.