Please use this identifier to cite or link to this item: http://hdl.handle.net/10553/42653
DC FieldValueLanguage
dc.contributor.authorMarrero Alemán, María Doloresen_US
dc.contributor.authorHernández Castellano, Pedro Manuelen_US
dc.contributor.authorSuárez, Luisen_US
dc.contributor.authorPestana Guillén, Jesús Daviden_US
dc.contributor.authorBenítez, Antonioen_US
dc.contributor.authorMartín, Joséen_US
dc.contributor.authorRivero, Silviaen_US
dc.contributor.authorCalero, Estelaen_US
dc.date.accessioned2018-11-21T10:32:03Z-
dc.date.available2018-11-21T10:32:03Z-
dc.date.issued2014en_US
dc.identifier.isbn978-0-7918-4585-1en_US
dc.identifier.otherWoS-
dc.identifier.urihttp://hdl.handle.net/10553/42653-
dc.description.abstractThe small wind energy produces electric energy using power turbines below 100 kW. This technology allows the electrical supply in places isolated, generates energy of way distributed (distributed microgeneration) and permits to produce electricity in the points of consumption. The rotomoulding process is characterized to allow hollow plastics parts, with great surface quality, good homogeneity of thicknesses and suitable mechanical properties, all this with a great freedom of design and a wide variety of materials. The Department of Economy and Competitiveness from Government of Spain, inside the Subprogram INNPACTO 2012, resolved to grant the project of title Development of new blades made for rotational moulding for small wind generators (RotEos). The main purpose of this project is focused on getting a viable and cheaper process to manufacture the blades to small wind generators without reducing the efficiency of them, and trying to increase the competitiveness of these turbines. This research work presents the initial results obtained in the design of the blades, materials characterization and in the manufacturing process of these components.en_US
dc.languageengen_US
dc.sourceASME 2014 12th Biennial Conference on Engineering Systems Design and Analysis, ESDA 2014, v. 3en_US
dc.subject331330 Turbinasen_US
dc.subject330603 Motores eléctricosen_US
dc.subject332202 Generación de energíaen_US
dc.subject.otherManufacturingen_US
dc.subject.otherMoldingen_US
dc.subject.otherBladesen_US
dc.subject.otherWind turbinesen_US
dc.titleRotational molding applied to the manufacturing of blades of small wind turbineen_US
dc.typeinfo:eu-repo/semantics/conferenceObjecten_US
dc.typeConferenceObjecten_US
dc.relation.conferenceASME 2014 12th Biennial Conference on Engineering Systems Design and Analysis, ESDA 2014en_US
dc.identifier.doi10.1115/ESDA2014-20539en_US
dc.identifier.scopus84916887069-
dc.identifier.isi000361407000052-
dc.contributor.authorscopusid8372557400-
dc.contributor.authorscopusid8372557600-
dc.contributor.authorscopusid7102054991-
dc.contributor.authorscopusid56443831400-
dc.contributor.authorscopusid13805747600-
dc.contributor.authorscopusid57210096811-
dc.contributor.authorscopusid57207023849-
dc.contributor.authorscopusid57094327700-
dc.contributor.authorscopusid56443824200-
dc.contributor.authorscopusid56444270100-
dc.relation.volume3en_US
dc.investigacionIngeniería y Arquitecturaen_US
dc.type2Actas de congresosen_US
dc.contributor.daisngid28521453-
dc.contributor.daisngid4734932-
dc.contributor.daisngid32205860-
dc.contributor.daisngid2003421-
dc.contributor.daisngid579452-
dc.contributor.daisngid31008361-
dc.contributor.daisngid12106718-
dc.contributor.daisngid28777890-
dc.description.numberofpages5en_US
dc.utils.revisionen_US
dc.contributor.wosstandardWOS:Marrero, MD-
dc.contributor.wosstandardWOS:Hernandez, P-
dc.contributor.wosstandardWOS:Suarez, L-
dc.contributor.wosstandardWOS:Pestana, D-
dc.contributor.wosstandardWOS:Benitez, A-
dc.contributor.wosstandardWOS:Martin, J-
dc.contributor.wosstandardWOS:Rivero, S-
dc.contributor.wosstandardWOS:Calero, E-
dc.date.coverdateEnero 2014en_US
dc.identifier.conferenceidevents121535-
dc.identifier.ulpgces
item.fulltextCon texto completo-
item.grantfulltextopen-
crisitem.event.eventsstartdate25-07-2014-
crisitem.event.eventsenddate27-07-2014-
crisitem.author.deptFabricación integrada y avanzada-
crisitem.author.deptDepartamento de Ingeniería Mecánica-
crisitem.author.deptFabricación integrada y avanzada-
crisitem.author.deptDepartamento de Ingeniería Mecánica-
crisitem.author.deptFabricación integrada y avanzada-
crisitem.author.deptDepartamento de Ingeniería de Procesos-
crisitem.author.orcidC0000-0002-9396-1649-
crisitem.author.orcid0000-0001-8443-118X-
crisitem.author.orcid0000-0001-5711-6395-
crisitem.author.parentorgDepartamento de Ingeniería Mecánica-
crisitem.author.parentorgDepartamento de Ingeniería Mecánica-
crisitem.author.parentorgDepartamento de Ingeniería Mecánica-
crisitem.author.fullNameMarrero Alemán, María Dolores-
crisitem.author.fullNameHernández Castellano, Pedro Manuel-
crisitem.author.fullNamePestana Guillén, Jesús David-
crisitem.author.fullNameBenítez Vega, Antonio Nizardo-
Appears in Collections:Actas de congresos
Thumbnail
Rotational_molding
Adobe PDF (8,5 MB)
Show simple item record

SCOPUSTM   
Citations

2
checked on Apr 18, 2021

Page view(s)

41
checked on Apr 18, 2021

Download(s)

104
checked on Apr 18, 2021

Google ScholarTM

Check

Altmetric


Share



Export metadata



Items in accedaCRIS are protected by copyright, with all rights reserved, unless otherwise indicated.