Identificador persistente para citar o vincular este elemento: http://hdl.handle.net/10553/42652
Título: Boundary element method applied to electroforming process
Autores/as: Hernández Castellano, Pedro Manuel 
Socas, Ayoze
Benítez, Antonio 
Ortega, Fernando
Diaz, Noelia 
Marrero Alemán, María Dolores 
Monzón, Mario 
Clasificación UNESCO: 331212 Ensayo de materiales
331208 Propiedades de los materiales
Palabras clave: Additive Manufacturing (AM)
Electroforming
Rapid Manufacturing
Rapid Tooling
Fecha de publicación: 2014
Editor/a: 0255-5476
Publicación seriada: Materials Science Forum 
Conferencia: 5th Manufacturing Engineering Society International Conference (MESIC) 
5th International Conference of Manufacturing Engineering Society, MESIC 2013 
Resumen: Elecform3DTM is a analysis and simulation tool of electroforming process, in order to facilitate design and manufacturing tasks. Electroforming is an electrolytic process that enables the manufacture of metallic parts with good mechanical properties with a high level of accuracy and reproducibility. In this process a thin metallic shell is deposited on a model part and later released from it. Distribution of deposited metal is not uniform due to current density distribution on the cathode. The results obtained with the first version of this product were very promising, and also indicated the need for a more precise analysis of electrochemical phenomena in this process.The methodology is based on the well-known potentials model of LaPlace, it enables deposited metal distribution prediction with high grade of precision, being experimentally validated with cathodic polarization curves. These boundary conditions at the electrodes serve to combine the existing electrical and chemical effects in the process. On the active surfaces of the electrodes the current density is a function of the nonlinear laws of polarization in the electrode-electrolyte interface. Analytically the resolution of these problems is totally unworkable, at least for real geometries, so it is used for solving the employment of numerical methods. The resolution has been considered using the boundary element method (BEM), because we are only interested in obtaining the solution on the surface of the cathode. Elecform3DTM is an important step beyond electroforming so far, and combined with almost all additive manufacturing 3D printer, is a cheaper alternative for high quality metallic parts manufacturing in comparison with other Rapid Manufacturing technologies.
URI: http://hdl.handle.net/10553/42652
ISBN: 9783038351252
ISSN: 0255-5476
DOI: 10.4028/www.scientific.net/MSF.797.125
Fuente: Materials Science Forum[ISSN 0255-5476],v. 797, p. 125-132
Colección:Actas de congresos
miniatura
Adobe PDF (252,18 kB)
Vista completa

Google ScholarTM

Verifica

Altmetric


Comparte



Exporta metadatos



Los elementos en ULPGC accedaCRIS están protegidos por derechos de autor con todos los derechos reservados, a menos que se indique lo contrario.