Identificador persistente para citar o vincular este elemento: http://hdl.handle.net/10553/42648
Título: Electroforming Applied to Manufacturing of Microcomponents
Autores/as: Campos, D. 
Socorro, P.
Benítez, A.
Benítez, A. 
Ortega, F.
Díaz, N. 
Marrero Alemán, María Dolores 
Clasificación UNESCO: 3312 Tecnología de materiales
3306 Ingeniería y tecnología eléctricas
Palabras clave: Electroforming
Micro-metrology
Micro-injection moulding.
Fecha de publicación: 2015
Publicación seriada: Procedia Engineering 
Conferencia: 6th Manufacturing Engineering Society International Conference (MESIC) 
Resumen: Nowadays, there is an increased demand for micro-products and micro-components in many industry sectors therefore development of advanced manufacturing technologies and metrological instrumentation in this range, have thus become a critical issue and an engineering challenge. If a product cannot be measured, although it might be manufactured, it would not be possible to analyse its design in order to improve its functionality. Electroforming could be defined as the highly specialized use of electrodeposition for the manufacturing of metal parts. Due to progress in materials, processes and equipment, electroforming has shown considerable development. Consequently, electroforming is increasingly combined with other micro-manufacturing technologies, giving rise to other processes such as LIGA and UV-LIGA. Thanks to the accumulated experience of Fabricación Integrada y Avanzada research group, of the University of Las Palmas de Gran Canaria in the electroforming process focused on macro-scale, as well as specific equipment available, this paper aims to analyse the potential of electroforming process for micro-injection mould manufacturing.
URI: http://hdl.handle.net/10553/42648
ISSN: 1877-7058
DOI: 10.1016/j.proeng.2015.12.544
Fuente: Procedia Engineering,v. 132, p. 655-662
Colección:Actas de congresos
miniatura
Adobe PDF (475,15 kB)
Vista completa

Google ScholarTM

Verifica

Altmetric


Comparte



Exporta metadatos



Los elementos en ULPGC accedaCRIS están protegidos por derechos de autor con todos los derechos reservados, a menos que se indique lo contrario.