Please use this identifier to cite or link to this item: http://hdl.handle.net/10553/42554
Title: Measurement of biofouling in seawater: some practical tests
Authors: Veza, Jose M.
Ortiz, Marta
Sadhwani, Jose J. 
González González, Juan Emilio 
Santana, Francisco J. 
UNESCO Clasification: 330804 Ingeniería de la contaminación
330806 Regeneración del agua
330810 Tecnología de aguas residuales
330811 Control de la contaminación del agua
Keywords: Fouling Biomass Reverse osmosis ATP
Biomass Reverse osmosis ATP
Reverse osmosis ATP
ATP
Issue Date: 2008
Publisher: 0011-9164
Journal: Desalination (Amsterdam) 
Conference: Conference on Desalination and the Environment 
Abstract: Fouling from the biomass present in seawater is a major drawback in the operation of marine reverse osmosis plants. Much in-plant work has been carried out to reduce or alleviate the problems, and there are some tools that can be used for assessing the probability of water causing biofouling. However, there is not a generalised tool, and more specifically, there is no standard indicator of the biofouling potential in waters loaded with biomass. An indicator such as silt density index (SDI) is often used, although it cannot give precise information about biomass. Other indicators such as the modified fouling index (MFI) have been developed to improve the information acquired from the saline water. Adenosine triphosphate (ATP) has been suggested as an indicator of biomass contents, therefore indicating biofouling potential. When subjected to the light and luciferine-luciferase is added, ATP produces luminescence, which can be detected and measured in relative luminescence units (RLU). Water samples can be taken with the assistance of a fouling biomonitor and later analysed by photoluminescence. Although there is some published information about measurements in slightly saline waters that is not the case in seawater. The purpose of the paper is to provide results of measurements of ATP and other indicators of biomass content made on seawater samples in the Atlantic Ocean. The first issue when measuring marine waters is to take care of the saline effect, e.g. the interference in ATP measurements due to the high salinity of seawaters. We have developed some modifications in the analytical procedure to avoid the saline interference, published elsewhere. With that modified procedure, we have carried out some measurements in different locations and conditions. Both laboratory and field tests were performed. The obvious advantage in the former is a more stable process where sampling is more reliable. The field tests were performed on feed-water before and after passing through sand filters, which gave us the opportunity to analyse the accumulation of biomass in those filters. Another test is related to a comparison between water extracted from an open sea intake, as compared to seawater drawn from a beach well. In the latter case, the ATP contents are lower, as expected, indicating lower biomass contents and biofouling potential. A first evaluation of the development of ATP along time has also been carried out, in order to determine the biofouling potential rate (BPR), with preliminary results showing little growth, most probably because of the quality of feed water, which is filtered through the beach well.
URI: http://hdl.handle.net/10553/42554
ISSN: 0011-9164
DOI: 10.1016/j.desal.2007.01.037
Source: Desalination[ISSN 0011-9164],v. 220, p. 326-334
Appears in Collections:Artículos
Show full item record

SCOPUSTM   
Citations

33
checked on Mar 24, 2024

WEB OF SCIENCETM
Citations

27
checked on Feb 20, 2022

Page view(s)

81
checked on Jan 24, 2024

Google ScholarTM

Check

Altmetric


Share



Export metadata



Items in accedaCRIS are protected by copyright, with all rights reserved, unless otherwise indicated.