Please use this identifier to cite or link to this item: http://hdl.handle.net/10553/20067
DC FieldValueLanguage
dc.contributor.authorMonzón Verona, Mario Domingoen_US
dc.contributor.authorOrtega Medina, Zaida Cristinaen_US
dc.contributor.authorHernández, Albaen_US
dc.contributor.authorPaz Hernández, Rubénen_US
dc.contributor.authorOrtega García,Fernandoen_US
dc.contributor.otherOrtega, Zaida-
dc.contributor.otherMonzon, Mario D.-
dc.date.accessioned2017-02-02T15:07:02Z-
dc.date.accessioned2018-03-16T09:13:27Z-
dc.date.available2017-02-02T15:07:02Z-
dc.date.available2018-03-16T09:13:27Z-
dc.date.issued2017en_US
dc.identifier.issn1996-1944en_US
dc.identifier.urihttp://hdl.handle.net/10553/20067-
dc.description.abstractDigital light processing (DLP) is an accurate additive manufacturing (AM) technology suitable for producing micro-parts by photopolymerization. As most AM technologies, anisotropy of parts made by DLP is a key issue to deal with, taking into account that several operational factors modify this characteristic. Design for this technology and photopolymers becomes a challenge because the manufacturing process and post-processing strongly influence the mechanical properties of the part. This paper shows experimental work to demonstrate the particular behavior of parts made using DLP.en_US
dc.languageengen_US
dc.relation.ispartofMaterialsen_US
dc.sourceMaterials [ISSN 1996-1944 ], v. 10 (1), 64en_US
dc.subject331208 Propiedades de los materialesen_US
dc.subject331210 Plásticosen_US
dc.subject331212 Ensayo de materialesen_US
dc.subject.otherAdditive manufacturingen_US
dc.subject.otherPhotopolymeren_US
dc.subject.otherDigital light processingen_US
dc.subject.otherAnisotropyen_US
dc.titleAnisotropy of photopolymer parts made by digital light processingen_US
dc.typeinfo:eu-repo/semantics/Articleen_US
dc.typeArticleen_US
dc.identifier.doi10.3390/ma10010064en_US
dc.identifier.scopus85011684941-
dc.identifier.isi000394838800063-
dcterms.isPartOfMaterials
dcterms.sourceMaterials[ISSN 1996-1944],v. 10 (1)
dc.contributor.authorscopusid7003371153-
dc.contributor.authorscopusid36241994700-
dc.contributor.authorscopusid57199074657-
dc.contributor.authorscopusid8590822200-
dc.contributor.authorscopusid56599899700-
dc.identifier.absysnet731713-
dc.identifier.crisid2367;18567;-;37869;--
dc.relation.volume10en_US
dc.investigacionIngeniería y Arquitecturaen_US
dc.rights.accessrightsinfo:eu-repo/semantics/openAccessen_US
dc.type2Artículoen_US
dc.contributor.daisngid1363424-
dc.contributor.daisngid2273115-
dc.contributor.daisngid13912365-
dc.contributor.daisngid2158374-
dc.contributor.daisngid2980703-
dc.identifier.investigatorRIDH-3145-2015-
dc.identifier.investigatorRIDNo ID-
dc.identifier.external2367;18567;-;37869;--
dc.identifier.externalWOS:000394838800063-
dc.identifier.external2367;18567;-;37869;--
dc.utils.revisionen_US
dc.contributor.wosstandardWOS:Monzon, M-
dc.contributor.wosstandardWOS:Ortega, Z-
dc.contributor.wosstandardWOS:Hernandez, A-
dc.contributor.wosstandardWOS:Paz, R-
dc.contributor.wosstandardWOS:Ortega, F-
dc.date.coverdateEnero 2017en_US
dc.identifier.supplement2367;18567;-;37869;--
dc.identifier.supplement2367;18567;-;37869;--
dc.identifier.supplement2367;18567;-;37869;--
dc.identifier.supplement2367;18567;-;37869;--
dc.identifier.supplement2367;18567;-;37869;--
dc.identifier.supplement2367;18567;-;37869;--
dc.identifier.ulpgcen_US
dc.contributor.buulpgcBU-INGen_US
dc.description.sjr0,732
dc.description.jcr2,467
dc.description.sjrqQ2
dc.description.jcrqQ2
dc.description.scieSCIE
item.grantfulltextopen-
item.fulltextCon texto completo-
crisitem.author.deptFabricación integrada y avanzada-
crisitem.author.deptIngeniería Mecánica-
crisitem.author.deptFabricación integrada y avanzada-
crisitem.author.deptIngeniería de Procesos-
crisitem.author.deptFabricación integrada y avanzada-
crisitem.author.deptIngeniería Mecánica-
crisitem.author.orcid0000-0003-2736-7905-
crisitem.author.orcid0000-0002-7112-1067-
crisitem.author.orcid0000-0003-1223-7067-
crisitem.author.parentorgIngeniería Mecánica-
crisitem.author.parentorgIngeniería Mecánica-
crisitem.author.parentorgIngeniería Mecánica-
crisitem.author.fullNameMonzón Verona, Mario Domingo-
crisitem.author.fullNameOrtega Medina, Zaida Cristina-
crisitem.author.fullNamePaz Hernández, Rubén-
crisitem.author.fullNameOrtega García,Fernando-
Appears in Collections:Artículos
Thumbnail
Adobe PDF (5,97 MB)
Show simple item record

SCOPUSTM   
Citations

56
checked on Sep 26, 2021

WEB OF SCIENCETM
Citations

34
checked on May 2, 2021

Page view(s)

61
checked on Sep 26, 2021

Download(s)

109
checked on Sep 26, 2021

Google ScholarTM

Check

Altmetric


Share



Export metadata



This item is licensed under a Creative Commons License Creative Commons