Identificador persistente para citar o vincular este elemento:
https://accedacris.ulpgc.es/handle/10553/141107
| Campo DC | Valor | idioma |
|---|---|---|
| dc.contributor.author | Suárez García, Luis | en_US |
| dc.contributor.author | Ortega Medina, Zaida Cristina | en_US |
| dc.date.accessioned | 2025-06-25T15:25:14Z | - |
| dc.date.available | 2025-06-25T15:25:14Z | - |
| dc.date.issued | 2025 | en_US |
| dc.identifier.isbn | 978-989-36314-0-9 | en_US |
| dc.identifier.uri | https://accedacris.ulpgc.es/handle/10553/141107 | - |
| dc.description.abstract | This work assesses the impact ofwater absorption on the mechanical performance of polylactic acid (PLA) composites reinforced with giant reed fibres. lnjection moulded composites with two different types of lignocellulosic fillers: fibres (F) and shredded biomass (S) obtained from giant reed plants, and four ratios, from 5 to 40% by weight, were tested. The mechanical tests performed allowed to identify the variations in density, tensile, flexura!, brittleness and damping properties befare and after water absorption saturation. Aesthetic changes were also evaluated by colour analysis. | en_US |
| dc.language | eng | en_US |
| dc.publisher | SCIENCETRIS | en_US |
| dc.source | 7th International Conference on Natural Fibers - Nature Inspired Sustainable Solutions, Lisboa, Portugal, 16-18 Junio 2025, [ISBN 978-989-36314-0-9], p. 348-349 | en_US |
| dc.subject | 3313 Tecnología e ingeniería mecánicas | en_US |
| dc.subject | 331005 Ingeniería de procesos | en_US |
| dc.title | EFFECT OF WATER SOAKING ON THE MECHANICAL PERFORMANCE OF PLA/ GIANT REED {ARUNDO DONAX L.) COMPOSITES | en_US |
| dc.type | info:eu-repo/semantics/conferenceobject | en_US |
| dc.type | ConferenceObject | en_US |
| dc.relation.conference | 7th International Conference on Natural Fibers - Nature Inspired Sustainable Solutions | en_US |
| dc.description.lastpage | 349 | en_US |
| dc.description.firstpage | 348 | en_US |
| dc.investigacion | Ingeniería y Arquitectura | en_US |
| dc.type2 | Actas de congresos | en_US |
| dc.description.numberofpages | 2 | en_US |
| dc.utils.revision | Sí | en_US |
| dc.date.coverdate | Junio 2025 | en_US |
| dc.identifier.ulpgc | Sí | en_US |
| dc.contributor.buulpgc | BU-ING | en_US |
| item.grantfulltext | open | - |
| item.fulltext | Con texto completo | - |
| crisitem.author.dept | GIR Fabricación integrada y avanzada | - |
| crisitem.author.dept | Departamento de Ingeniería Mecánica | - |
| crisitem.author.dept | GIR Fabricación integrada y avanzada | - |
| crisitem.author.dept | Departamento de Ingeniería de Procesos | - |
| crisitem.author.orcid | 0000-0002-6709-1555 | - |
| crisitem.author.orcid | 0000-0002-7112-1067 | - |
| crisitem.author.parentorg | Departamento de Ingeniería Mecánica | - |
| crisitem.author.parentorg | Departamento de Ingeniería Mecánica | - |
| crisitem.author.fullName | Suárez García, Luis Adargoma | - |
| crisitem.author.fullName | Ortega Medina, Zaida Cristina | - |
| Colección: | Actas de congresos | |
Los elementos en ULPGC accedaCRIS están protegidos por derechos de autor con todos los derechos reservados, a menos que se indique lo contrario.