Identificador persistente para citar o vincular este elemento: https://accedacris.ulpgc.es/handle/10553/137197
Título: Evaluation of the Structure, Microhardness and Corrosion Properties of Cobalt-chromium Dental Alloys with Two Different Cooling Media
Autores/as: Jiménez Marcos,Cristina 
Mirza Rosca, Julia Claudia 
Vermesan, Dinu
Saceleanu, Adriana
Clasificación UNESCO: 3313 Tecnología e ingeniería mecánicas
3314 Tecnología médica
Palabras clave: Co-Cr alloys
Heat treatment
Microstructure
Corrosion
Microhardness
Fecha de publicación: 2025
Proyectos: Smart Healthcare Engineering (SHEng)
Publicación seriada: International Journal of Metalcasting 
Resumen: This study investigates the impact of cooling rate after heat treatment on the electrochemical and microstructural properties of three dental Co-Cr alloys. Advanced techniques, such as scanning electronspectroscopy and X-ray diffraction,were used to evaluate the microstructures and compositions of the alloys, revealing the influence of elements such as tungsten and niobium on their electrochemical behavior. The results have shown that the alloys with 5%Mo exhibited higher porosity than the alloy with Nb and W. High melting temperature due to the presence of Nb and W ensured a more homogeneous material and a slightly altered structure. For all alloys, heat-treated samples showed higher microhardness compared with casting samples. A passive behavior was observed for all the samples with the best stability at high potential for the alloy with the highest Cr content due to the formation of a protective Cr2O3 passive layer. Water-quenched samples showed high impedance values, demonstrating their effectiveness in corrosion resistance. The choice of cooling methods and alloy composition is crucial for improving corrosion resistance and mechanical properties of dental frameworks.
ISSN: 1939-5981
DOI: 10.1007/s40962-025-01596-6
Fuente: International Journal of Metalcasting [ISSN, 1939-5981], p. 1-14 (2025)
Colección:Artículos
Adobe PDF (2,94 MB)
Vista completa

Google ScholarTM

Verifica

Altmetric


Comparte



Exporta metadatos



Los elementos en ULPGC accedaCRIS están protegidos por derechos de autor con todos los derechos reservados, a menos que se indique lo contrario.