Identificador persistente para citar o vincular este elemento: http://hdl.handle.net/10553/132115
Título: The Recyclability of Fire-Retarded Biobased Polyamide 11 (PA11) Composites Reinforced with Basalt Fibers (BFs): The Influence of Reprocessing on Structure, Properties, and Fire Behavior
Autores/as: Barczewski, Mateusz
Hejna, Aleksander
Andrzejewski, Jacek
Aniśko, Joanna
Piasecki, Adam
Mróz, Adrian
Ortega Medina, Zaida Cristina 
Rutkowska, Daria
Sałasińska, Kamila
Clasificación UNESCO: 3303 ingeniería y tecnología químicas
330804 Ingeniería de la contaminación
Palabras clave: Polyamide
PA11
Polyamide
Mechanical recycling
Waste management, et al.
Fecha de publicación: 2024
Publicación seriada: Molecules 
Resumen: The growing requirements regarding the safety of using polymers and their composites are related to the emergence of more effective, sustainable, and hazardous-limited fire retardants (FRs). Significant amounts of FRs are usually required to effectively affect a polymer’s burning behavior, while the knowledge of their recycling potential is still insufficient. At the same time, concerns are related not only to the reduced effectiveness of flame retardancy but also, above all, to the potential deterioration of mechanical properties caused by the degradation of temperature-affected additives under processing conditions. This study describes the impact of the four-time reprocessing of bio-based polyamide 11 (PA11) modified with an intumescent flame-retardant (IFR) system composed of ammonium polyphosphate (APP), melamine cyanurate (MC), and pentaerythritol (PER) and its composites containing additional short basalt fibers (BFs). Composites manufactured via twin-screw extrusion were subjected to four reprocessing cycles using injection molding. A comprehensive analysis of their structural, mechanical, and fire behavior changes in each cycle was conducted. The obtained results confirmed the safety of using the proposed fire-retarded polyamide and its composites while reprocessing under the recommended process parameters without the risk of significant changes in the structure. The partial increase in flammability of reprocessed PA-based materials caused mainly by polymer degradation has been described.
URI: http://hdl.handle.net/10553/132115
ISSN: 1420-3049
DOI: 10.3390/molecules29133233
Fuente: Molecules [ISSN 1420-3049], v. 29(13), 323
Colección:Artículos
miniatura
PDF
Adobe PDF (9,1 MB)
Vista completa

Google ScholarTM

Verifica

Altmetric


Comparte



Exporta metadatos



Los elementos en ULPGC accedaCRIS están protegidos por derechos de autor con todos los derechos reservados, a menos que se indique lo contrario.