Identificador persistente para citar o vincular este elemento: http://hdl.handle.net/10553/128791
Título: Experimental application of a laboratory equipment for micro-electroforming using models manufactured with additive technology
Autores/as: Sánchez Morales, Carlos Jesús 
Martínez Rivero, María Dolores 
Hernández Castellano, Pedro Manuel 
Marrero Alemán, María Dolores 
Salguero, J
Clasificación UNESCO: 3313 Tecnología e ingeniería mecánicas
331005 Ingeniería de procesos
Palabras clave: Micro-electroforming
Micro-manufacturing
Additive manufacturing
Microstructured surfaces
Micro-sinker electro discharge machining
Fecha de publicación: 2021
Editor/a: Institute of Physics (IOP) 
Proyectos: MEJORA DEL RENDIMIENTO FUNCIONAL DE SUPERFICIES MEDIANTE LA TEXTURIZACIÓN A DIFERENTES ESCALAS (DPI2017-84935-R)
Publicación seriada: IOP conference series. Materials science and engineering 
Resumen: One of the manufacturing processes applications on a microscopic scale, consists in modifying parts or components´ surfaces to improve their properties. Unconventional machining processes are needed to generate complex geometries, high details reproduction, and excellent finished surfaces at that scale. Micro sinker electrical discharge manufacturing (μSEDM) process could be one good option. The electrode manufacturing is one of the main drawbacks. It supposes a big resources waste before starting to manufacture. In this way, working on a microscopic scale becomes a challenge to obtain different shapes and textures on functional surfaces. In this work, combined use of micro-electroforming and digital light processing (DLP) additive manufacturing is presented. These two additive techniques are completely different and unrelated in their applications, materials, and technological fundamentals. However, their combination is a low-cost option to obtain good results in the manufacture of μ-SEDM electrodes. Therefore, it was necessary to develop a micro-electroforming equipment to meet the challenge. Furthermore, device had to have the ability to adapt the process parameters to the needs of the parts. As a result of this experimental application, we got high-quality parts, which could have an industrial application.
URI: http://hdl.handle.net/10553/128791
ISSN: 1757-8981
DOI: 10.1088/1757-899X/1193/1/012024
Fuente: IOP conference series. Materials science and engineering [ISSN 1757-8981, eISSN 1757-899X], v. 1193, p. 1-8, 012024, (Junio 2021)
Colección:Actas de congresos
Adobe PDF (1,51 MB)
Vista completa

Google ScholarTM

Verifica

Altmetric


Comparte



Exporta metadatos



Los elementos en ULPGC accedaCRIS están protegidos por derechos de autor con todos los derechos reservados, a menos que se indique lo contrario.