Identificador persistente para citar o vincular este elemento: http://hdl.handle.net/10553/112545
Título: Simulation and exergoeconomic analysis of the syngas and biodiesel production process from spent coffee grounds
Autores/as: Tinoco Caicedo, Diana Lucía 
Mero-Benavides, M
Santos-Torres, M
Lozano Medina, Alexis 
Blanco Marigorta, Ana María 
Clasificación UNESCO: 332202 Generación de energía
332205 Fuentes no convencionales de energía
Palabras clave: Syngas
Biodiesel
Exergy destruction cost
Investment cost rate
Exergetic efficiency
Fecha de publicación: 2021
Publicación seriada: Case Studies in Thermal Engineering 
Resumen: The integrated production of biofuels from agro-industrial wastes is increasing around the world. The thermodynamic performance and economic analysis of these processes have become topics of interest given the need to reduce the cost of biofuels and their impact on the environment. This study develops a simulation of the production process of syngas and biodiesel from spent coffee grounds, and an exergoeconomic analysis that mainly determines the exergy destruction rate, the investment and operational cost rate, and the exergy destruction cost rate at component level and for the overall system. The total investment cost for the integrated process resulted in 13.2 million dollars. The specific cost of syngas and biodiesel from spent coffee grounds were estimated in $0.36/kg and $0.71/kg, respectively. The results show that the drying process including the air heating for the pretreatment of the biomass had an exergy destruction rate of 11,463 kW and was responsible of the 92% of the overall exergy destruction cost rate. An increment of the dead state temperature reduced the specific cost of syngas and biodiesel in 17% and 8%, respectively. Future studies should focus on the exergoeconomic optimization of the drying process of biomass in order to minimize the operational costs.
URI: http://hdl.handle.net/10553/112545
ISSN: 2214-157X
DOI: 10.1016/j.csite.2021.101556
Fuente: Case Studies in Thermal Engineering [ISSN 2214-157X], v. 18, (Diciembre 2021)
Colección:Artículos
Adobe PDF (1,95 MB)
Vista completa

Google ScholarTM

Verifica

Altmetric


Comparte



Exporta metadatos



Los elementos en ULPGC accedaCRIS están protegidos por derechos de autor con todos los derechos reservados, a menos que se indique lo contrario.