Identificador persistente para citar o vincular este elemento:
http://hdl.handle.net/10553/112124
Título: | Advanced exergoeconomic analysis of a double effect evaporation process in an instant coffee plant | Autores/as: | Tinoco Caicedo, Diana Lucía Feijoó-Villa, E. Calle-Murillo, J. Lozano-Medina, A. Blanco Marigorta, Ana María |
Clasificación UNESCO: | 3309 Tecnología de los alimentos | Palabras clave: | Advanced Exergoeconomic Analysis Avoidable Cost Rate Double Effect Evaporation Process Simulation |
Fecha de publicación: | 2021 | Editor/a: | Elsevier | Publicación seriada: | Computer Aided Chemical Engineering | Conferencia: | 31st European Symposium on Computer Aided Process Engineering (ESCAPE 31) | Resumen: | The advanced exergoeconomic analysis performed on different industrial processes is used to determine the avoidable exergy destruction and inversion cost rates in order to increase the rentability and sustainability of a factory. This study focuses on the performance of an advanced exergoeconomic analysis of a double effect evaporation process (DEEP) of coffee extract in a factory located in Ecuador. The avoidable and unavoidable exergy destruction cost rate and the avoidable investment cost rate were determined for each component by exergoeconomic balances using the results from the process simulation with the best operational conditions and with the worst operational conditions. The avoidable exergy destruction cost rate represents 18.3% of the overall exergy destruction cost rate. It was estimated that around 70.3 $/h of the overall operational costs could be saved if the exergetic efficiency of the first double effect evaporator (D-101) and the steam condenser (E-103) increased from 46.3% to 60.7% and 52.3% to 61.6%, respectively. Additionally, an increment of the initial concentration of soluble solids in the extract can reduce the avoidable operational costs by 15%. | URI: | http://hdl.handle.net/10553/112124 | ISBN: | 9780323885133 | ISSN: | 1570-7946 | DOI: | 10.1016/B978-0-323-88506-5.50056-5 | Fuente: | Computer Aided Chemical Engineering [ISSN 1570-7946], v. 50, p. 353-358, (Enero 2021) |
Colección: | Capítulo de libro |
Los elementos en ULPGC accedaCRIS están protegidos por derechos de autor con todos los derechos reservados, a menos que se indique lo contrario.