Identificador persistente para citar o vincular este elemento: http://hdl.handle.net/10553/111614
Título: Microstructure and Adjustment in Tensile Strength of Al0.8CoCrFeNi
Autores/as: Florido Suárez, Néstor Rubén 
Socorro-Perdomo, Pedro P. 
Voiculescu, Ionelia
Mirza Rosca, Julia Claudia 
Fecha de publicación: 2021
Proyectos: CABINFR2019-07
Publicación seriada: Microscopy and Microanalysis 
Resumen: The notion of high entropy alloys is a significant new change in alloys design, as they emphasize compositions that are close to the center of a multicomponent phase diagram, in contrast to conventional alloys that are controlled by one basic element. The high entropy alloys can potentially stack solid-solution phases with respect to intermetallic compounds and can give rise to interesting properties such as superior hardness, notable toughness, superior fracture toughness and corrosion resistance [1][2] As potentially remarkable engineering alloys, the AlCoCrFeNi HEA system has stimulated considerable research activities because it possesses a series of attractive physical, chemical and mechanical qualities [3]. The objective of this research is the assessment of the microstructure progression and tuning of the mechanical properties of l0.8CoCrFeNi fibers produced by cutting followed by annealing at 1100 °C. By thermomechanical treatment and microstructure monitoring, equilibrated tensile properties were obtained at room temperature. In comparison to the bulk as-cast alloy, the heat-treated fibers exhibit an elongation significantly major [4]. The disadvantage in improving the ductility of the fibers was a decrease in yield strength and fracture toughness.
URI: http://hdl.handle.net/10553/111614
ISSN: 1435-8115
DOI: 10.1017/S1431927621011648
Fuente: Microscopy and Microanalysis [EISSN 1435-8115], 27(S1), 3386-3388
Colección:Artículos
Adobe PDF (243,92 kB)
Vista completa

Visitas

68
actualizado el 10-feb-2024

Descargas

27
actualizado el 10-feb-2024

Google ScholarTM

Verifica

Altmetric


Comparte



Exporta metadatos



Los elementos en ULPGC accedaCRIS están protegidos por derechos de autor con todos los derechos reservados, a menos que se indique lo contrario.