Identificador persistente para citar o vincular este elemento: http://hdl.handle.net/10553/42670
Título: Rapid prototyping applied to a new development in moulds for rotational moulding
Autores/as: Monzón, Mario D. 
Marrero Alemán, María Dolores 
Benítez Vega, Antonio N. 
Hernández Castellano, Pedro Manuel 
Kearns, M.
Clasificación UNESCO: 331003 Procesos industriales
331212 Ensayo de materiales
Palabras clave: Rapid prototyping
Rotational moulding
Haptics
Electroforming
Rapid manufacturing, et al.
Fecha de publicación: 2007
Publicación seriada: Virtual and Physical Prototyping 
Conferencia: 3rd International Conference on Advanced Research in Virtual and Rapid Prototyping 
Resumen: The aim of this work has been to adapt and apply the advantages of rapid prototyping and electroforming technologies to try to achieve an innovative mould design for rotational moulding. The new innovative design integrates an electroformed shell, manufactured starting from a rapid prototyping mandrel, with different designed standard aluminium tools. The shell holder enables mould assembly with high precision manufacture of a shell in a few minutes. The overall mould cost is significantly decreased because it is only necessary to manufacture one or two shells each time; however, the rest of the elements of the mould are standard and usable for an infinite number of shells, depending on size.
URI: http://hdl.handle.net/10553/42670
ISBN: 978-0-415-41602-3
ISSN: 1745-2759
DOI: 10.1080/17452750701744341
Fuente: Virtual And Rapid Manufacturing [ISSN 1745-2759], v. 2 (4), p. 449-454
Colección:Actas de congresos
Vista completa

Google ScholarTM

Verifica

Altmetric


Comparte



Exporta metadatos



Los elementos en ULPGC accedaCRIS están protegidos por derechos de autor con todos los derechos reservados, a menos que se indique lo contrario.